Laserfiche WebLink
Conventional Dispenser (Retrofitted) <br /> Typical Set-lip <br /> (No Venturi Req 'd) <br /> Conforms to California Air <br /> Resources Board(C A.R B.) <br /> Executive Order GJO 2 <br /> Exhibit d5 <br /> Retractor <br /> Retractor <br /> Clamp <br /> Primary Hose <br /> for Breakaway <br /> "Breakaway <br /> Set-Up <br /> (Optional) <br /> Breakaway <br /> Secondary <br /> Hose for <br /> Breakaway <br /> "Per NFPA 30A, the <br /> breakaway must be <br /> installed between the <br /> retractor clamp and <br /> the nozzle <br /> Original II <br /> Gasoline o <br /> Port <br /> Gasline <br /> Jumper The hose must not "drape" more than <br /> Hose 10" below the base of the nozzle, when <br /> the nozzle is hanging on the dispenser. <br /> Coaxial Coaxial <br /> Adapter Hose PLEASE NOTE: PIPE DOPE OR TAPE SHOULD <br /> or NOT BE USED ON COAXIAL HOSE <br /> Vapor FITTINGS. <br /> Valve <br /> Island <br /> Vapor Return Piping <br /> to Underground Tank <br /> 'The proper hose length will depend upon the height of the retractor. <br /> This is tabulated for each dispenser in the pages that follow. <br /> ©1991 Dayco Products, Inc.(Rev.6/91) 1 <br />