Laserfiche WebLink
SWRCB,January 2002 • • Page of <br /> 8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps ❑ <br /> Fill Riser Containment Sumps are Present,but were Not Tested ❑ <br /> Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard ❑Professional Engineer <br /> ❑Other(Specify) <br /> Test Method Used: ❑Pressure ❑Vacuum ❑Hydrostatic <br /> ❑Other(Spec) <br /> Test Equipment Used: Equipment Resolution: <br /> Fill Sump# Fill Sump# Fill Sum # Fill ump# <br /> Sump Diameter: <br /> Sump Depth: <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Conditipn of sump prior to <br /> testing: <br /> Portion of Sump Tested <br /> Sump Material: <br /> Wait time between applying <br /> pressure/vacuum/water and <br /> starting test: <br /> Test Start Time: <br /> Initial Reading(RD: <br /> Test End Time/:� <br /> Final Reading(RF : <br /> Test Duration: <br /> Change in Reading(RF-R): <br /> Pass/Fail Threshold or Criteria: <br /> Test Result: ❑ Pass 0 FaV F" ❑ Pass ❑Fail ❑ Pass 0 Fail ❑ Pass ❑Fail <br /> Is there a sensor in the sump? ❑Yes ❑ ❑Yes ❑No ❑Yes ❑No ❑Yes ❑No <br /> Does the sensor alarm when <br /> either product or water is ❑Yes ON/DNA ❑Yes ❑NO ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No [INA <br /> detected? <br /> Was sensor removed for testing? ❑Yes o [INA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA <br /> Was sensor properly replaced and <br /> verified functional after testing? ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA <br /> Comments— include information o4lrepairs made p7ior to testing, and recommended ollow-u or ailed tests) <br />