Laserfiche WebLink
I <br /> Warnings And Alarms <br /> Page 8 <br /> The TLS Console is constantly monitoring its probes and sensors for warning and • <br /> alarm conditions, such as fuel leaks, excessively high or low fuel levels, and Q( Do not ignore alarms!!! <br /> equipment problems. <br /> Be sure you are familiar with the alarm response procedures for the site, <br /> If there is no warning or alarm condition active the system displays the "ALL To Switch-Off All Warnings and Alarms <br /> FUNCTIONS NORMAL"message. Press the red ALARMITEST key to silence the alarm. <br /> If a warning or alarm condition occurs the system displays condition type and its The front panel warning and alarm lights cannot be turned off until the cause of the <br /> location,either tank,input or sensor number, condition has been rectified. <br /> The system prints an alarm report showing the warning or alarm type, its location Similarly the warning and alarm displays remain until the cause of the condition has <br /> and the date and time the warning or alarm condition occurred. been rectified. <br /> If more than one condition exists the console will flash the messages alternately. PLLD/WPLLD Alarm information <br /> g y For PLLDMIPLLD line leak detection alarms,refer to following manuals: <br /> WARNINGS -PLLDMMPLLD Alarm Quick Help manual(PIN 577013-727) <br /> These indicate that an in-tank alarm is imminent or that a system fault has occurred. -TLS-350/TLS-350R Operator's Manual(P/N 576013-610) <br /> ALARMS <br /> Alarms indicate a potentially dangerous situation may have occurred. • <br />