Laserfiche WebLink
San Joaquin County DIRECTOR <br /> _ Donna Heran,REHS <br /> Environmental Health Department ASSISTANT DIRECTOR <br /> 600 East Main Street <br /> Laurie Cotulla,REHS <br /> Stockton, California 95202-3029 PROGRAM COORDINATORS <br /> Carl Borgman,REHS <br /> Mike Huggins,REHS,RDI <br /> Website: www.sjgov.org/ehd Margaret Lagono,REHS <br /> �rFOR Phone: (209) 468-3420 Robert McClellan,REHS <br /> Fax: (209) 464-0138 Jeff Carruesco,REHS,RDI <br /> Kasey Foley,REHS <br /> November 15, 2007 <br /> Chuck Hill <br /> Champion Precision Testing <br /> P.O. Box 87 <br /> Edison, CA 93220 <br /> Re: 707 E Yosemite Ave,Manteca,CA 95336 <br /> The San Joaquin County Environmental Health Department(EHD)has completed the <br /> review of the application for permit(SR0052567)to install the FE Petro STP-MLD and <br /> STP-MLD-D mechanical line leak detectors on the 87, 91 and diesel product turbines at <br /> the above noted address. The permit has been approved with the following conditions: <br /> 1. Contact the local fire department and the San Joaquin Valley Air Pollution <br /> Control District for any applicable permits and requirements. <br /> 2. Contact Garrett Backus at(209)468-2986 to arrange the following inspection <br /> appointment(a 48-hour notice is required for inspection appointments): <br /> a. Functionality test(Test for 3 gallon per hour leak at 10 psi) <br /> 3. Any changes in information and scope of work must be submitted to EHD for <br /> approval prior to commencing work. All new addenda supersede the previous <br /> ones. <br /> 4. Qualified service technicians must possess or work under the direct and personal <br /> supervision of an individual physically present at the work site who possesses all <br /> of the following: <br /> a. One of several permissible valid, current contractor's licenses issued by <br /> the Contractors State License Board(may be issued to the installation <br /> company), and <br /> b. A valid, current California UST Service Technician certificate issued by <br /> the International Code Council (ICC), and <br /> c. A valid, current certificate of training from the manufacturer(s) of the <br /> component(s)being tested, repaired, or serviced, and <br /> d. Each person installing or testing any component must hold a certificate of <br /> training from the manufacturer of that component. <br /> 5. Complete and submit a copy of a UST Installation Certificate of Compliance <br /> (Former Form C) to this office no later than 30 days after work is completed. <br />