Laserfiche WebLink
• • <br /> California Edition:September 1997 <br /> Vaporless Manufacturing <br /> Vaporless LD 2000E and LD 2000E-S <br /> AUTOMATIC MECHANICAL LINE LEAK DETECTOR <br /> Certification: Leak rate of 3.0 gph with Pp=100% and PFA=0% <br /> Leak Threshold: 2.0 gph. A leak is declared if the output of the measurement system equals or exceeds <br /> this threshold. <br /> Applicability: Gasoline, diesel, aviation fuel and solvents. <br /> Specification: System tests flexible pipelines. <br /> Tests are conducted at operating pressure. <br /> Pipeline Capacity: Maximum of 59.6 gallons. <br /> Waiting Time: None between dispensing and testing. <br /> None between delivery and testing. <br /> Test Period: Response time is 30 seconds. <br /> System Features: Permanent installation on pipeline. <br /> Automatic testing of pipeline. <br /> Preset threshold. <br /> Single test to determine if pipeline is leaking. <br /> LD2000E - restricts flow to dispenser if leak is declared. <br /> LD2000ES -pump shutoff if leak is declared. <br /> Calibration: System must be checked annually for capability of detecting a line leak of <br /> 3.0 gph. <br /> Comments: Enviroflex piping with a bulk modulus* of 1,352 psi was used during evaluation. <br /> *See glossary. <br /> Vaporless Manufacturing Evaluator: Ken Wilcox Associates <br /> 9234 E. Valley Rd., Suite C Tel: (816)443-2494 <br /> Prescott Valley, AZ 86314 — <br /> Tel: (602)775-5191 Date of Evaluation: 12/11/92 <br /> 270 <br /> Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of <br /> the method or equipment. Equipment should be installed and operated in accordance with all applicable laws and regulations. <br />