Laserfiche WebLink
Veeder-Root Sensor Application Guide <br /> Sump Sensor <br /> The sensor is installed in a tank piping sump and will detect the presence of a liquid. Liquid level is monitored by a <br /> float/magnetic reed switch sensing system. <br /> Sensor Detection Capabilities - Alarm Conditions <br /> Fuel alarm is triggered when liquid reaches a nominal height of 1-inch. <br /> Operating Capabilities <br /> • Operating temperature range: 0 to+60°C. <br /> • Storage temperature range: -40 to+70°C. <br /> • Sensor dimensions: 12"high, 1.9"diameter. <br /> Sensor/Cable Length Configurations <br /> • Sump Sensor w/ 12 foot cable- Form Number 794380-208 <br /> • Sump Sensor w/30 foot cable- Form Number 794380-209 <br /> Sensor Interface Module <br /> • TLS-350 Series Consoles(except TLS-350J)-Interstitial Sensor Interface Module(Form Number 847490-102) <br /> accepts up to 8 sensors(a maximum of 64 sensors could be monitored by the console). <br /> • TLS-350J Console-3 sensors max. <br /> • TLS-300/PC-300 Series Consoles(no Interface Module required)-8 sensors max. <br /> • ILS-350 Console-A Two-Wire Module(Form Number 845190-100)accepts up to 4 sensors(a maximum of 16 <br /> sensors could be monitored by the console). <br /> Console Software Compatibility <br /> • Version 1 or later(TLS-350 Series/TLS-300 Consoles) <br /> • All ILS-350 Consoles <br /> Compatible Fuels <br /> • Unleaded gasoline <br /> o ' <br /> • Leaded gasoline Existing conduit <br /> • Diesel or piping <br /> • Kerosene <br /> • Jet fuel -a Product <br /> • Aviation gasoline cable to junction box Cable to junction pipe <br /> • 5%methanol/95%unleaded and seal-off box and seal-off - <br /> • 15%ethanol/85% unleaded <br /> • 15% MTBE/85%unleaded <br /> 'Sump sensor should: ''I' � • '" <br /> 1.Rest on the base of the sump $' <br /> Related Sales Literature <br /> 2.Be positioned as close to outer :_ <br /> wall as possible. 0 Sump sensor- <br /> Visit our website at www iveedercom ',. 1 Be mounted in a true vertical ",;I (installation examples) F.3 <br /> for more information on Veeder-Root position. <br /> 4.Be installed only in a dry sump + `! <br /> products and services. <br /> 3 <br /> .Sump base <br /> v!+y i <br /> Fig.2 Typical Sump Sensor Installation <br /> 5 <br />