|
• Jawn1
<br /> Product Data Sheet 1
<br /> Edition 9.13.2012 Issaedtm slkaCorpora*
<br /> d
<br /> Sikaflex-1a Prodacl: Slkafte-IA
<br /> C719u Pais ✓ ExI•3505 Comp.-35%
<br /> S i ka f I ex° Substrata:Ma iar AlJminum Gies
<br /> �� � (.err su5trr.ve P'^'PnMG,.,Fnmri llJf
<br /> C661:Rating AA
<br /> One part polyurethane, elastomeric VaildaIIaa Data:V3,;2-dlw
<br /> Ra.ABi2.311211 CopYW.:ilPor7
<br /> sealant/adhesive ,
<br /> Description Sikaflex-1a is a premium-grade,high-performance,moisture-cured, 1-component,polyurethane-based,
<br /> non-sag elastomeric sealant.Meets Federal specification TT-S-00230C,Type II,Class A. Meets ASTM
<br /> C-920,Type S,Grade NS,Class 35, use T,NT,0,M,G, I;Canadian standard CANICGSB 19.13-M87.
<br /> Where to Use ■ Designed for all types of joints where maximum depth of sealant will not exceed 112 in.
<br /> ■ Excellent for small joints and fillets,windows,door frames,reglets,flashing,common roofing detail ap-
<br /> plications,and many construction adhesive applications.
<br /> ■ Suitable for vertical and horizontal joints;readily placeable at 40'F.
<br /> r Has many applications as an elastic adhesive between materials with dissimilar coefficients of expansion.
<br /> ■ Submerged conditions,such as canal and reservoir joints.
<br /> Advantages a Eliminates time,effort,and equipment for mixing,filling cartridges,pre-heating or thawing,and cleaning
<br /> of equipment
<br /> ■ Fast tack-free and final cure times.
<br /> Is High elasticity-cures to a tough,durable,flexible consistency with exceptional cut and tear-resistance.
<br /> In Stress relaxation.
<br /> ■ Excellent adhesion-bonds to most construction materials without a primer.
<br /> r Excellent resistance to aging,wealhering.
<br /> r Proven in tough climates around the world.
<br /> In Odorless,non-staining.
<br /> ■ Jet fuel resistant.
<br /> ■ Certified to the NSF/ANSI Standard 61 for potable water.
<br /> ■ Urethane-based;suggested by EPA for radon reduction.
<br /> r Paintable with water-,oil-and rubber-based paints.
<br /> ■ Capable of±35%joint movement.
<br /> Coverage 10.1 fl.oz.cartridge seals 12.4 lineal ft.of 112 x 114 in.joint.20 0,oz.uni-pac sausage seals 24 lineal ft,of
<br /> 112 x 114 in.joint.
<br /> Packaging Disposable 10.1 fl.oz.,moisture-proof composite cartridges,241case;and uni-pac sausages,20 fl.oz„201
<br /> carton.
<br /> Typical Data (Material and curing conditions @ 73°F'(23°C)and 50%R.N.)
<br /> RESULTS MAY DIFFER BASED UPON STATISTICAL VARIATIONS DEPENDING UPON MIXING METHODS AND EQUIPMENT,
<br /> TEMPERATURE,APPLICATION METHODS,TEST METHODS,ACTUAL.SITE CONDITIONS AND CURING CONDITIONS.
<br /> Shelf Life 10.1 0.oz.cartridges 12 months
<br /> 20 fl.oz. uni-pac sausages 12 months
<br /> 5 gallon pail 6 months
<br /> 55 gallon drum 6 months
<br /> Storage Conditions Store at 40°-95°F(4°-35`C).Condition material to 65'-75°F before using.
<br /> Colors White, colonial white,aluminum gray,limestone,black,dark bronze,capitol tan,
<br /> stone and medium bronze. Special architectural colors on request.
<br /> Application Temperature 40°to 100°F.Sealant should be installed when joint is at mid-range of its
<br /> anticipated movement.
<br /> Service Range -40°to 170°F
<br /> Curing Rate Tack-free time 3 to 6 hours
<br /> Tack-free to touch 3 hours
<br /> Final cure 4 to 7 days
<br /> Tear Strength(ASTM D-624) 55 lb,/in.
<br /> Shore A Hardness(ASTM C-661) 21 day 40±5
<br /> Movement Capability(ASTM C-719) +(-35%
<br /> Tensile Properties(ASTM D-412)
<br /> 21 day Tensile Stress 175 psi(1.21 MPa)
<br /> Elongation at Break 550%
<br /> Modulus of Elasticity 25% 35 psi(0.24 MPa)
<br /> 50% 60 psi(0.41 MPa)
<br /> 100°% 85 psi(0.59 MPa)
<br /> Adhesion in Peel(TT-S-002300,ASTM C 794)
<br /> Substrate Peel Strength Adhesion Loss
<br /> Concrete 20 lb. 0%
<br /> Aluminum 20 lb. 0%
<br /> ® Glass 20 lb. 0%
<br /> —Ko Weathering Resistance Excellent
<br /> Chemical Resistance Good resistance to water,diluted acids, and diluted alkalises.Consult Technical
<br /> Service for specific data.
<br />
|