|
CODE REQUIREMENTS (CBC) ACCESSIBILITY NOTES ACCESSIBILITY NOTES (CONT.)
<br /> ACCESSIBLE ROUTES FLOOR OR GROUND SPACES (CONT.) DOORS AND DOORWAYS (CONT.)
<br /> V-2"
<br /> 11B-206.2.1 SITE ARRIVAL POINTS. AT LEAST ONE ACCESSIBLE ROUTE SHALL BE 11B-306.2.2 MAXIMUM DEPTH. TOE CLEARANCE SHALL EXTEND 25 INCHES (635 MM) _
<br /> PROVIDED WITHIN THE SITE FROM ACCESSIBLE PARKING SPACES AND MAXIMUM UNDER AN ELEMENT. TYPE OF USE MINIMUM MANEUVERING CLEARANCE
<br /> 36"GRAB BAR ACCESSIBLE PASSENGER LOADING ZONES; PUBLIC STREETS AND SIDEWALKS;
<br /> AND PUBLIC TRANSPORTATION STOPS TO THE ACCESSIBLE BUILDING OR FACILITY 11B-306.2.3 MINIMUM REQUIRED DEPTH. WHERE TOE CLEARANCE IS REQUIRED AT PARALLEL TO
<br /> EXISTING PAPER - APPROACH PERPENDICULAR TO DOORWAY(BEYOND
<br /> ENTRANCE THEY SERVE. WHERE MORE THAN ONE ROUTE IS PROVIDED, ALL AN ELEMENT AS PART OF A CLEAR FLOOR SPACE, THE TOE CLEARANCE SHALL DOOR OR GATE SIDE
<br /> TOWEL TOILET PAPER ROUTES MUST BE ACCESSIBLE. EXTEND 17 INCHES (432 MM) MINIMUM UNDER THE ELEMENT. DIRECTION DOORWAY LATCH SIDE UNLESS
<br /> DISPENSER DISPENSER NOTED(
<br /> 6 11B-206.2.2 WITHIN A SITE. AT LEAST ONE ACCESSIBLE ROUTE SHALL CONNECT 11B-306.2.4 ADDITIONAL CLEARANCE. SPACE EXTENDING GREATER THAN 6 FROM FRONT PULL 60 INCHES(1524 M M) 1S INCHES(457 FAM)!
<br /> ACCESSIBLE BUILDINGS, ACCESSIBLE FACILITIES, ACCESSIBLE ELEMENTS,AND INCHES (152 MM) BEYOND THE AVAILABLE KNEE CLEARANCE AT 9 INCHES (229 MM) FROM FRONT PUSH 48 INCHES (1219 MI%4) D INCHES (0 MM)' ©2011 STARBUCKS COFFEE
<br /> LL. w o = ACCESSIBLE SPACES THAT ARE ON THE SAME SITE. ABOVE THE FINISH FLOOR OR GROUND SHALL NOT BE CONSIDERED TOErInNAD
<br /> 20 U)E z ~oOf E FROh:1 HINGE SIDE PULL 60 INCHES(1524 MIA) 36 INCHES(914 MM)
<br /> LU CLEARANCE.
<br /> 44INCHES(1115 STARBUCKS COFFEE
<br /> o� a 0° LL a, 11B-206.2.4 SPACES AND ELEMENTS. AT LEAST ONE ACCESSIBLE ROUTE SHALL FROM HINGE SIDE PUSH 22 INCHES(559IVIM)
<br /> 0 0: ~o o ; U_ N CONNECT ACCESSIBLE BUILDING OR FACILITY ENTRANCES WITH ALL ACCESSIBLE 11B-306.2.5 WIDTH. TOE CLEARANCE SHALL BE 30 INCHES (762 MM)WIDE MINIMUM. A1M�
<br /> 8 _ of m w M R "' SPACES AND ELEMENTS WITHIN THE BUILDING OR FACILITY, INCLUDING FROM LATCH SIDE PULL 60 INCHES(1524 AjFA9) 24 INCHES(610 MM) COMPANY
<br /> CL
<br /> CV (0 0 MEZZANINES, WHICH ARE OTHERWISE CONNECTED BY A CIRCULATION PATH 11B-306.3 KNEE CLEARANCE. FROM LATCH SIDE PUSH 44 INCHES(1115 24 INCHES(610 h1M)
<br /> M UNLESS EXEMPTED BY SECTION 11B-206.2.3 EXCEPTIONS 1 THROUGH 7. AIMS 2401 UTAH AVENUE SOUTH
<br /> 11B-306.3.1 GENERAL. SPACE UNDER AN ELEMENT BETWEEN 9 INCHES (229 MM) ADD 12 INCHES(305 MIA) IF CLOSER AND LATCH ARE PROVIDED. SEATTLE, WASHINGTON 98134
<br /> 3-6"MIN 1'4" 11B-206.2.5 RESTAURANTS, CAFETERIAS, BANQUET FACILITIES AND BARS. IN AND 27 INCHES 686 MM ABOVE THE FINISH FLOOR OR GROUND SHALL BE ADD 4 INCHES(102114P4) IF CLOSER AND LATCH ARE PROVIDED. 206 318-1575
<br /> ( ) BEYOND HINGE SIDE.
<br /> RESTAURANTS, CAFETERIAS, BANQUET FACILITIES, BARS, AND SIMILAR CONSIDERED KNEE CLEARANCE AND SHALL COMPLY WITH SECTION I IB-306.3. ADD 4 INCHES(102 AAAA) IF CLOSER IS PROVIDED.
<br /> FACILITIES, AN ACCESSIBLE ROUTE SHALL BE PROVIDED TO ALL FUNCTIONAL ADD 6INCHES(152 AAAA)AT EXTERIOR SIDE OF EXTERIOR DO DRS. THESE DRAWINGS AND SPECIFICATIONS ARE
<br /> AREAS, INCLUDING RAISED OR SUNKEN AREAS, AND OUTDOOR AREAS. 11B-306.3.2 MAXIMUM DEPTH. KNEE CLEARANCE SHALL EXTEND 25 INCHES (635 CONFIDENTIAL AND SHALL REMAIN THE SOLE
<br /> TYPICAL RESTROOM TYPICAL RESTROOM MM) MAXIMUM UNDER AN ELEMENT AT 9 INCHES (229 MM)ABOVE THE FINISH PROPERTY OF STARBUCKS CORPORATION,
<br /> EMPLOYEE WOR EMPLOYEE WORK
<br /> SHALLCOMPLY WITHUSE SECTION118-400N PATHS WITHIN FLOOR OR GROUND. WHICH IS THE WORK. THEYOSHALLL OF
<br /> BE REPRO UCED (INPYRIGHT IN
<br /> 20 ACCESSIBLE MOUNTING HEIGHTS .1 . ACCESSIBLE MOUNTING HEIGHTS 1T DOORS MANEUVERING CLEARANCES. MINIMUM MANEUVERING CLEARANCES
<br /> 11B-306.3.3 MINIMUM REQUIRED DEPTH. WHERE KNEE CLEARANCE IS REQUIRED CL DOORS AND GATES SHALL COMPLY WITH SECTION 118-404.2.4. MANEUVERING WHOLE OR IN PART), SHARED WITH THIRD
<br /> Scale=3/8"=V-0" ELEVATION Scale=3/8"=V-0" ELEVATION 11B-402.2 COMPONENTS. ACCESSIBLE ROUTES SHALL CONSIST OF ONE OR MORE UNDER AN ELEMENT AS PART OF A CLEAR FLOOR SPACE, THE KNEE CLEARANCE CLEARANCES SHALL EXTEND THE FULL WIDTH OF THE DOORWAY AND THE PARTIES OR USED IN ANY MANNER ON OTHER
<br /> OF THE FOLLOWING COMPONENTS: WALKING SURFACES WITH A RUNNING SLOPE SHALL BE 11 INCHES (279 MM) DEEP MINIMUM AT 9 INCHES (229 MM)ABOVE THE REQUIRED LATCH SIDE OR HINGE SIDE CLEARANCE. PROJECTS OR EXTENSIONS TO THIS PROJECT
<br /> NOT STEEPER THAN 1:20, DOORWAYS, RAMPS, CURB RAMPS EXCLUDING THE FINISH FLOOR OR GROUND, AND 8 INCHES (203 MM) DEEP MINIMUM AT 27 INCHES O SWINGING DOORS AND GATES. SWINGING DOORS AND GATES WITHOUT THE PRIOR WRITTEN CONSENT OF
<br /> SHHALLALLHAAVEVE MANEUVERING CLEARANCES COMPLYING WITH TABLE 118-404.2.4.1.
<br /> EQ EQ 9" NOTE: FLARED SIDES, ELEVATORS, AND PLATFORM LIFTS.ALL COMPONENTS OF AN (686 MM)ABOVE THE FINISH FLOOR OR GROUND. STARBUCKS CORPORATION. THESE DRAWINGS
<br /> 48"GRAB BAR DOOR-MOUNTED RESTROOM ACCESSIBLE ROUTE SHALL COMPLY WITH THE APPLICABLE REQUIREMENTS OF AND SPECIFICATIONS ARE INTENDED TO EXPRESS
<br /> DIVISION 4. 11B-306.3.4 CLEARANCE REDUCTION. BETWEEN 9 INCHES (229 MM)AND 27 INCHES 1 AND
<br /> OTHER
<br /> DOOR AND GATE HARDWARE. HANDLES, PULLS, LATCHES, LOCKS, DESIGN INTENT FOR A PROTOTYPICAL
<br /> TOILET PAPER DISPENSER SIGNAGE TO COMPLY WITH (686 MM)ABOVE THE FINISH FLOOR OR GROUND, THE KNEE CLEARANCE SHALL BE AND OTHER OPERABLE PARTS ON DOORS AND GATES SHALL COMPLY WITH STARBUCKS STORE (WHICH IS SUBJECT TO
<br /> CALIFORNIA TITLE 24 A.D.A. PERMITTED TO REDUCE AT A RATE OF 1 INCH (25 MM) IN DEPTH FOR EACH 6 SECTION MINIMUM
<br /> OPERABLE PARTS OF SUCH HARDWARE SHALL BE 34 INCHES CHANGE AT ANYTIME)AND DO NOT REFLECT
<br /> 18 REQUIREMENTS. FLOOR OR GROUND SPACES INCHES (152 MM) IN HEIGHT. (864 MM) MINIMUM AND 44 INCHES (1118 MM) MAXIMUM ABOVE THE FINISH FLOOR ACTUAL SITE CONDITIONS. NEITHER PARTY SHALL
<br /> SEAT COVER DISPENSER COO OR GROUND. WHERE SLIDING DOORS ARE IN THE FULLY OPEN POSITION, HAVE ANY OBLIGATION NOR LIABILITY TO THE
<br /> GC TO VERIFY COMPLIANCE 11B-302 FLOOR OR GROUND SURFACES 11B-306.3.5 WIDTH. KNEE CLEARANCE SHALL BE 30 INCHES (762 MM)WIDE OPERATING HARDWARE SHALL BE EXPOSED AND USABLE FROM BOTH SIDES. OTHER (EXCEPT STATED ABOVE) UNTIL A
<br /> AND AND MINIMUM. �3(�_
<br /> SIGNAGE AIS NECESSARY. SLP RESISTANT AND SHALL
<br /> COMPLY WITH SECTION SURFACES SHALL BE
<br /> BE STABLE, FIRM, AND WITHIN 01INCHHEOS (AND GATE 254 MM) OF SURFACES.
<br /> F FINISH FLIOOR OR ROUND MEASURED FACES ARCHITECT OF F T d4RTIF-
<br /> REACH RANGES VERTICALLY SHALL HAVE A SMOOTH SURFACE ON THE PUSH SIDE EXTENDING
<br /> UNI 3E 11B-303 CHANGES IN LEVEL THE FULL WIDTH OF THE DOOR OR GATE. PARTS CREATING HORIZONTAL OR o
<br /> _ 11B-308 REACH RANGES VERTICAL JOINTS IN THESE SURFACES SHALL BE WITHIN 1/16 INCH (1.6 MM) OF
<br /> _ UNISEX SIGNAGE 11B-303.1 GENERAL. WHERE CHANGES IN LEVEL ARE PERMITTED IN FLOOR OR THE SAME PLANE AS THE OTHER AND BE FREE OF SHARP OR ABRASIVE EDGES. U
<br /> 0 SHOWN, GROUND SURFACES, THEY SHALL COMPLY WITH SECTION IIB-303. 11B-308.1.1 ELECTRICAL SWITCHES. CONTROLS AND SWITCHES INTENDED TO BE CAVITIES CREATED BY ADDED KICK PLATES SHALL BE CAPPED.
<br /> U ITI I i DESIGNATED SIGNAGE USED BY THE OCCUPANT OF A ROOM OR AREA TO CONTROL LIGHTING AND
<br /> 6' L_J FOR MEN'S&WOMEN'S 11B-303.2 VERTICAL. CHANGES IN LEVEL OF '/, INCH (6.4 MM) HIGH MAXIMUM SHALL RECEPTACLE OUTLETS, APPLIANCES OR COOLING, HEATING AND VENTILATING
<br /> BE PERMITTED TO BE VERTICAL AND WITHOUT EDGE TREATMENT. EQUIPMENT, SHALL COMPLY WITH SECTION 11 B-308 EXCEPT THE LOW REACH RAMPS m c g a r c h i t e c u r
<br /> RESTROOMS USED
<br /> X `CD
<br /> D WHENSHALL BE MEASURED TO THE BOTTOM OF THE OUTLET BOX AND THE HIGH REACH 111 Pacifica, Suite 280, IrvinO, CA 92618
<br /> APPLICABLE. 11B-303.3 BEVELED. CHANGES IN LEVEL BETWEEN '/4 INCH (6.4 MM) HIGH MINIMUM SHALL BE MEASURED TO THE TOP OF THE OUTLET BOX. 11B-405.2 SLOPE. RAMP RUNS SHALL HAVE A RUNNING SLOPE NOT STEEPER P:949.553.1117 F: 949.474.7056
<br /> LO AND '/z INCH (12.7 MM) HIGH MAXIMUM SHALL BE BEVELED WITH A SLOPE NOT THAN 1:12.
<br /> r1_ STEEPER THAN 1:2. 11B-308.1.2 ELECTRICAL RECEPTACLE OUTLETS. ELECTRICAL RECEPTACLE
<br /> � OUTLETS ON BRANCH CIRCUITS OF 30 AMPERES OR LESS AND COMMUNICATION 11B-405.4 FLOOR OR GROUND SURFACES. FLOOR OR GROUND SURFACES OF ARCHITECT STAMP
<br /> m7"9"MAX 11B-304 TURNING SPACE SYSTEM RECEPTACLES SHALL COMPLY WITH SECTION 11B-308 EXCEPT THE LOW RAMP RUNS SHALL COMPLY WITH SECTION 11B-302. CHANGES IN LEVEL OTHER ARC
<br /> >) 1 0 MIN REACH SHALL BE MEASURED TO THE BOTTOM OF THE OUTLET BOX AND THE HIGH THAN THE RUNNING SLOPE AND CROSS SLOPE ARE NOT PERMITTED ON RAMP 1tV11N��l�t
<br /> 11B-304.3 SIZE. TURNING SPACE SHALL COMPLY WITH SECTION 11B-304.3.1 OR 11B- REACH SHALL BE MEASURED TO THE TOP OF THE OUTLET BOX. RUNS.
<br /> �+
<br /> CN
<br /> TYPICAL RESTROOM ACCESS I BLE 304.3.2. 11B-308.2 FORWARD REACH. 11B-405.5 CLEAR WIDTH. THE CLEAR WIDTH OF A RAMP RUN SHALL BE 48 INCHES s11B-304.3.1 THE TURNING SPACE yIt
<br /> MOUNTING HEIGHTS RR DOOR SIGNAGE INCHES (15241RCULAR MM) DIAMETAER MINIMUM THE SPACE SHALLLBE PERMITTED TO 11B-308.2.1 UNOBSTRUCTED. WHERE A FORWARD REACH IS UNOBSTRUCTED, THE 11B-405.6)
<br /> 1B 4 5 6BE A SPACE OF 60 (1219 MM)
<br /> 19 INCLUDE KNEE AND TOE CLEARANCE COMPLYING WITH SECTION 118-306. HIGH FORWARD REACH SHALL BE 48 INCHES (1219 MM) MAXIMUM AND THE LOW MAXIMUM.RISE. HE RISE FOR ANY RAMP RUN SHALL BE 30 INCHES (762 MM) 2a1 s
<br /> P
<br /> n i_ ' 4 4`... ENE
<br /> , C'
<br /> 15
<br /> LLL Scale:3/8 = 1-0' ELEVATION Scale: 112"=V=0' ELEVATION FORWARD REACH SHALL BE 15 INCHES (381 MM) MINIMUM ABOVE THE FINISH
<br /> 11B-304.3.2 T-SHAPED SPACE. THE TURNING SPACE SHALL BE A T-SHAPED SPACE FLOOR OR GROUND. 11B-405.7 LANDINGS. RAMPS SHALL HAVE LANDINGS AT THE TOP AND THE ---
<br /> WITHIN A 60 INCH (1524 MM)SQUARE MINIMUM WITH ARMS AND BASE 36 INCHES BOTTOM OF EACH RAMP RUN. LANDINGS SHALL COMPLY WITH SECTION IIB-405.7.
<br /> ' WOMEN MEN UNISEX (914 MM)WIDE MINIMUM. EACH ARM OF THE T SHALL BE CLEAR OF OBSTRUCTIONS 11B-308.2.2 OBSTRUCTED HIGH REACH. WHERE A HIGH FORWARD REACH IS OVER
<br /> 12 INCHES (305 MM) MINIMUM IN EACH DIRECTION AND THE BASE SHALL BE CLEAR AN OBSTRUCTION, THE CLEAR FLOOR SPACE SHALL EXTEND BENEATH THE
<br /> Q OF OBSTRUCTIONS 24 INCHES (610 MM) MINIMUM. THE SPACE SHALL BE PERMITTED ELEMENT FOR A DISTANCE NOT LESS THAN THE REQUIRED REACH DEPTH OVER CURB RAMPS
<br /> U o TO INCLUDE KNEE AND TOE CLEARANCE COMPLYING WITH SECTION 11B-306 ONLY THE OBSTRUCTION. THE HIGH FORWARD REACH SHALL BE 48 INCHES (1219 MM)
<br /> c� AT THE END OF EITHER THE BASE OR ONE ARM. MAXIMUM WHERE THE REACH DEPTH IS 20 INCHES (508 MM) MAXIMUM. WHERE 11B-406.2 PERPENDICULAR CURB RAMPS. PERPENDICULAR CURB RAMPS SHALL
<br /> THE REACH DEPTH EXCEEDS 20 INCHES (508 MM), THE HIGH FORWARD REACH COMPLY WITH SECTIONS 11B-406.2 AND 11B-406.5.
<br /> 11B-305.7 MANEUVERING CLEARANCE. WHERE A CLEAR FLOOR OR GROUND SHALL BE 44 INCHES (1118 MM) MAXIMUM AND THE REACH DEPTH SHALL BE 25
<br /> NSPACE IS LOCATED IN AN ALCOVE OR OTHERWISE CONFINED ON ALL OR PART OF INCHES (635 MM) MAXIMUM. 11B-406.2.1 SLOPE. RAMP RUNS SHALL HAVE A RUNNING SLOPE NOT STEEPER
<br /> O ��- THREE SIDES, ADDITIONAL MANEUVERING CLEARANCE SHALL BE PROVIDED IN THAN 1:12.
<br /> ACCORDANCE WITH SECTIONS IIB-305.7.1 AND IIB-305.7.2. 11B-308.3 SIDE REACH.0 0
<br /> X MEN WOMEN�� 11B-406.2.2 SIDES OF CURB RAMPS. WHERE PROVIDED, CURB RAMP FLARES
<br /> 11B-305.7.1 FORWARD APPROACH. ALCOVES SHALL BE 36 INCHES (914 MM)WIDE 11B-308.3.1 UNOBSTRUCTED. WHERE A CLEAR FLOOR OR GROUND SPACE SHALL NOT BE STEEPER THAN 1:10.
<br /> Q 12" 12" 12" 1'_0.. \ _ MINIMUM WHERE THE DEPTH EXCEEDS 24 INCHES (610 MM). ALLOWS A PARALLEL APPROACH TO AN ELEMENT AND THE SIDE REACH IS 0
<br /> U \ UNOBSTRUCTED, THE HIGH SIDE REACH SHALL BE 48 INCHES 1219 MM MAXIMUM
<br /> \ � ( ) 11B-406.3 PARALLEL CURB RAMPS. PARALLEL CURB RAMPS SHALL COMPLY WITH
<br /> T NOTE: \ 11B-305.7.2 PARALLEL APPROACH. ALCOVES SHALL BE 60 INCHES (1524 MM)WIDE AND THE LOW SIDE REACH SHALL BE 15 INCHES (381 MM) MINIMUM ABOVE THE SECTIONS 11 B-406.3 AND 11 B-406.5.
<br /> SYMBOL DESCRIPTIONS WALL MOUNTED SIGNAGE TO BE LOCATED ON \ �� MINIMUM WHERE THE DEPTH EXCEEDS 15 INCHES (381 MM). FINISH FLOOR OR GROUND.
<br /> WOMEN'S SIGNAGE: 12" DIAMETER CIRCLE, 1/4"THICK. LATCH SIDE OF DOOR CLEAR OF DOOR-SWING. \ __\� 11B-406.3.1 SLOPE. THE RUNNING SLOPE OF THE CURB RAMP SEGMENTS SHALL Q0
<br /> I MOUNT AT 60"TO CENTERLINE OF SIGN FROM \ i y 11B-305 CLEAR FLOOR OR GROUND SPACE 11B-308.3.2 OBSTRUCTED HIGH REACH. WHERE A CLEAR FLOOR OR GROUND BE IN-LINE WITH THE DIRECTION OF SIDEWALK TRAVEL. RAMP RUNS SHALL HAVE Cl) (n [*--
<br /> O MEN'S SIGNAGE: EQUILATERAL TRIANGLE, 1/4"THICK WITH EDGES 12"
<br /> FLOOR. \\ �� \ SPACE ALLOWS A PARALLEL APPROACH TO AN ELEMENT AND THE HIGH SIDE A RUNNING SLOPE NOT STEEPER THAN 1:12. W C�
<br /> 11B-305.2 FLOOR OR GROUND SURFACES. FLOOR OR GROUND SURFACES OF A REACH IS OVER AN OBSTRUCTION, THE HEIGHT OF THE OBSTRUCTION SHALL BE 0 W L(7
<br /> 0 LONG &A VERTEX POINTING UPWARD. LETTERING RAISED 1/32" \/ ' ' 4_0
<br /> _ \I CLEAR FLOOR OR GROUND SPACE SHALL COMPLY WITH SECTION IIB-302. 34 INCHES (864 MM) MAXIMUM AND THE DEPTH OF THE OBSTRUCTION SHALL BE 24 11B-406.3.2 TURNING SPACE. A TURNING SPACE 48 INCHES (1219 MM) MINIMUM BY LU U
<br /> UNISEX SIGNAGE: 12" DIAMETER CIRCLE, 1/4"THICK TRIANGLE HEIGHT OF LETTERING 5/8" --------------�Vv_
<br /> OMEN) CHANGES IN LEVEL ARE NOT PERMITTED. INCHES (610 MM) MAXIMUM. THE HIGH SIDE REACH SHALL BE 48 INCHES (1219 MM) 48 INCHES (1219 MM) MINIMUM SHALL BE PROVIDED AT THE BOTTOM OF THE CURB Q C) Q
<br /> SUPERIMPOSED WITHIN CIRCLE. MIN. TO 2" MAX. MAXIMUM FOR A REACH DEPTH OF 10 INCHES (254 MM) MAXIMUM. WHERE THE RAMP. THE SLOPE OF THE TURNING SPACE IN ALL DIRECTIONS SHALL BE 1:48 Z 06 Q0 CORRESPONDING GRADE II BRAILLE. PER - �' '-- ;/ EXCEPTION: SLOPES NOT STEEPER THAN 1:48 SHALL BE PERMITTED. REACH DEPTH EXCEEDS 10 INCHES 254 MM , THE HIGH SIDE REACH SHALL BE 46
<br /> ALL SIGNAGE: SIGNS ARE TO BE CENTERED ON THE DOOR 60" FROM THE CBC SECT. 11 B-703.3.2 BRAILLE SHALL BE �` x ( ) MAXIMUM. 1--
<br /> 0 H
<br /> 06 Lo
<br /> FLOOR. THE COLOR AND CONTRAST OF THE SIGN DISTINCTIVELY FLUSH LEFT OR CENTERED AND PLACED A �� �� Z INCHES (1168 MM) MAXIMUM FOR A REACH DEPTH OF 24 INCHES (610 MM) LU LLI >1
<br /> __ _ 11B-305.3 SIZE. THE CLEAR FLOOR OR GROUND SPACE SHALL BE 30 INCHES (762 MAXIMUM. -1--+ U
<br /> CONTRASTS WITH THE COLOR AND CONTRAST OF THE DOOR. MIN. OF 3/8" INCH AND MAXIMUM OF 1/2 - o
<br /> 11B-406.5 COMMON REQUIREMENTS. CURB RAMPS AND BLENDED TRANSITIONS
<br /> oo co MM) MINIMUM BY 48 INCHES (1219 MM) MINIMUM. SHALL COMPLY WITH SECTION 11B-406.5. O 7- O
<br /> INCH BELOW RAISED CHARACTERS OR It 11B-309 OPERABLE PARTS OC) i
<br /> �I SYMBOLS FINISH FLOOR
<br /> 11B-305.4 KNEE AND TOE CLEARANCE. UNLESS OTHERWISE SPECIFIED, CLEAR
<br /> 008 RESTROOM DOOR SIGNAGE 4 ACCESS I BLE I D WALL SYMBOLS FLOOR ORANCEGROUND SPACE SHALL BE COMPLYING WITH SECTION IIBI 306D TO INCLUDE KNEE AND TOE 11B-309.1 GENERAL. OPERABLE PARTS SHALL COMPLY WITH SECTION 116-309. STORE #: 5875
<br /> m Scale:N.T.S. scale 1 1/2"= 1'-0" 11B-309.2 CLEAR FLOOR SPACE. A CLEAR FLOOR OR GROUND SPACE COMPLYING
<br /> 11B-305.5 POSITION. UNLESS OTHERWISE SPECIFIED, CLEAR FLOOR OR GROUND WITH SECTION IIB-305 SHALL BE PROVIDED. PROJECT #: 08798-038
<br /> U)I SPACE SHALL BE POSITIONED FOR EITHER FORWARD OR PARALLEL APPROACH TO OO OO OO OO
<br /> O AN ELEMENT. 11B-309.3 HEIGHT. OPERABLE PARTS SHALL BE PLACED WITHIN ONE OR MORE OF CASEWORK CONCEPT: CORE
<br /> N THE REACH RANGES SPECIFIED IN SECTION 11B-308. ISSUE DATE:
<br /> It CBC SECT 1008.1.1 -DOOR SIZE
<br /> cfl 11B-305.6 APPROACH. ONE FULL UNOBSTRUCTED SIDE OF THE CLEAR FLOOR OR
<br /> *3'0"DOOR WIDTH • Ae
<br /> GROUND SPACE SHALL ADJOIN AN ACCESSIBLE ROUTE OR ADJOIN ANOTHER 11B-309.4 OPERATION. OPERABLE PARTS SHALL BE OPERABLE WITH ONE HAND 0 _ DESIGN MANAGER: M. MONTENEGRO
<br /> *6'-8"HEIGHT CLEAR FLOOR OR GROUND SPACE. AND SHALL NOT REQUIRE TIGHT GRASPING, PINCHING, OR TWISTING OF THE LEEDS AP:
<br /> 0 *32"CLEAR WIDTH WRIST. THE FORCE REQUIRED TO ACTIVATE OPERABLE PARTS SHALL BE 5 PRODUCTION
<br /> 11B-305.7 MANEUVERING CLEARANCE. WHERE A CLEAR FLOOR OR GROUND POUNDS (22.2 N) MAXIMUM. O @NBY:
<br /> LO
<br /> CBC SECT 11B-404.2.9-DOOR OPENING FORCE SPACE IS LOCATED IN AN ALCOVE OR OTHERWISE CONFINED ON ALL OR PART OF MCG PROJECT#: 16420
<br /> C0 *TYPE OF HARDWARE:PUSH/PULL THREE SIDES, ADDITIONAL MANEUVERING CLEARANCE SHALL BE PROVIDED IN DOORS AND DOORWAYS O O ON
<br /> OO MCG PROJ. MANAGER: 6420
<br /> *MAX.EFFORT OFR EXT.DOORS=5 LBS ACCORDANCE WITH SECTIONS 11 B-305.7.1 AND I IB-305.7.2.
<br /> *MAX.EFFORT FOR INT.DOORS=5 LBS. 11B-404.2 MANUAL DOORS DOORWAYS AND MANUAL GATES. MANUAL DOORS MCG PROJ. SPECIALIST: L.COSTA
<br /> INTERIOR *REQUIRED FIRE DOORS,MAX.EFFORT=15 LBS. 11B-305.7.1 FORWARD APPROACH. ALCOVES SHALL BE 36 INCHES (914 MM)WIDE AND DOORWAYS AND MANUAL GATES INTENDED FOR USER PASSAGE SHALL 0.45"AT TOP TYPICAL PLAN
<br /> d
<br /> CBC SECT 11336.2.6 SMOOTH SURFACE 12" DIA 1'-0" MINIMUM WHERE THE DEPTH EXCEEDS 24 INCHES (610 MM). COMPLY WITH SECTION IIB-404.2. 2.35"490"AT BASE Revision Schedule
<br /> '10"KICKPLATE OR SMOOTH FULL 11B-305.7.2 PARALLEL APPROACH. ALCOVES SHALL BE 60 INCHES (1524 MM)WIDE 11B-404.2.2 DOUBLE-LEAF DOORS AND GATES. AT LEAST ONE OF THE ACTIVE Rev Date By Description
<br /> T_ = WIDTH OF DOOR MINIMUM WHERE THE DEPTH EXCEEDS 15 INCHES (381 MM).
<br /> O C7 LEAVES OF DOORWAYS WITH TWO LEAVES SHALL COMPLY WITH SECTIONS 11B-
<br /> CN w *4"FOR SOLD GLASS DOORS SANITARY FACILITIES 404.2.3 AND IIB-404.2.4. GROUT BED.
<br /> 11B-306 KNEE AND TOE CLEARANCE ~_ JOINT COLOR TO MATCH TILES.d- SECTION 2-1711. (TITLE 24 STATE BUILDING CODE) _
<br /> w - 3-IDENTIFICATION SYMBOLS: 11B-404.2.3 CLEAR WIDTH. DOOR OPENINGS SHALL PROVIDE A CLEAR WIDTH OF o
<br /> CBC SECT 1113-404.2.10-THRESHOLDS 11B-306.1 GENERAL. WHERE SPACE BENEATH AN ELEMENT IS INCLUDED AS PART cy
<br /> Q ;:t ON DOORWAYS LEADING TO MEN'S SANITARY FACILITIES AN EQUILATERAL 32 INCHES (813 MM) MINIMUM. CLEAR OPENINGS OF DOORWAYS WITH SWINGING RECESS CONC. PER MFR.
<br /> THE SPACE SHALL
<br /> � Q `� *112"MAX.THRESHOLD TRIANGLE 1/4"THICK WITH EDGES 12" LONG AND A VERTEX POINTING OF CLEAR FLOOR OR GROUND SPACE OR TURNING SPACE, DOORS SHALL BE MEASURED BETWEEN THE FACE OF THE DOOR AND THE RECOMMENDATIONS. TYPICAL SECTION A
<br /> UPWARD. COMPLY WITH SECTION IIB-306. ADDITIONAL SPACE SHALL NOT BE PROHIBITED STOP, WITH THE DOOR OPEN 90 DEGREES. OPENINGS MORE THAN 24 INCHES
<br /> Q *1/4"FT.MAX.SLOPE BENEATH AN ELEMENT BUT SHALL NOT BE CONSIDERED AS PART OF THE CLEAR NOTE: SHEET TITLE:
<br /> 00 = FLOOR OR GROUND SPACE OR TURNING SPACE. (610 MM) DEEP SHALL PROVIDE A CLEAR OPENING OF 36 INCHES (914 MM) 1. DETECTABLE WARNING SHALL BE OF CONTRASTING COLOR WITH
<br /> EXTERIOR SYMBOLS SHALL BE MOUNTED ON THE DOOR AT A HEIGHT OF +60' AFF TO THE MINIMUM. THERE SHALL BE NO PROJECTIONS INTO THE REQUIRED CLEAR ADJACENT ACCESSIBILITY NOTES
<br /> o CENTERLINE OF SIGN, &THEIR COLOR AND CONTRAST SHALL BE DISTINCTLY 11B-306.2 TOE CLEARANCE. OPENING WIDTH LOWER THAN 34 INCHES (864 MM)ABOVE THE FINISH FLOOR SURFACE: LIGHT-ON-DARK OR DARK-ON-LIGHT. MATERIAL SHALL BE
<br /> DIFFERENT FROM THE COLOR&CONTRAST OF THE DOOR. OR GROUND. PROJECTIONS INTO THE CLEAR OPENING WIDTH BETWEEN 34 INTEGRAL PART OF THE WALKING SURFACE.
<br /> SH
<br /> GROUND SHALL NOT EXCEED 4 INCHES (102 MM).
<br /> 11B-306.2.1 GENERAL. SPACE UNDER AN ELEMENT BETWEEN THE FINISH FLOOR OR INCHES ( MM)AND 80 INCHES (2032 MM)ABOVE THE FINISH FLOOR OR 2. TRUNCATED DOMES TO BE: "INTERLOCK SAN DIEGO"TACTILE STONE, SCALE:AS SHOWN
<br /> �
<br /> SECTION @ ENTRY DOOR GROUND AND 9 INCHES (229 MM)ABOVE THE FINISH FLOOR OR GROUND SHALL BE CARLSBAD, CALIFORNIA (760)434-5566 OR APPROVED EQUAL.
<br /> ADA COMPIANCE DETAIL ACCESSIBLE ID DOOR SYMBOLS CONSIDERED TOE CLEARANCE AND SHALL COMPLY WITH SECTION 118-306.2. _ TRUNCATED DOMES SHEET NUMBER:
<br /> 0 Scale: N.T.S. `� Scale 1 1/2" = 1'-0"
<br /> ��� Scale 6"= 1'-0" G-0003
<br />
|