|
FINISHES FINISHES FINISHES FI HES
<br /> SECTION 092216-NON-STRUCTURAL STEEL FRAMING SECTION 092900-GYPSUM BOARD SECTION 095113-ACOUSTICAL PANEL CEILINGS SECTION 095423- LINEAR METAL CEILINGS
<br /> 1.1 SUMMARY 1.1 SUMMARY 1.1 SUMMARY 1.1 COMPONENTS\ �
<br /> A. NON-LOAD-BEARING STEEL FRAMING MEMBERS FOR INTERIOR FRAMING A. INTERIOR GYPSUM BOARD. A. ACOUSTICAL PANELS AND EXPOSED SUSPENSION SYSTEMS. A. MOLDINGS AND TRIM.
<br /> SYSTEMS. B. TILE BACKING PANELS. B. SEISMIC STRUTS.
<br /> 1.2 SUBMITTALS C. HOLD-DOWN CLIPS.
<br /> 1.2 MATERIALS 1.2 SUBMITTALS A. PRODUCT DATA: FOR EACH TYPE OF PRODUCT INDICATED. D. ALUMINUM PANS AND SUSPENSION SYSTEM:
<br /> A. STEEL FRAMING FOR FRAMED ASSEMBLIES: A. PRODUCT DATA: FOR EACH TYPE OF PRODUCT INDICATED. B. COORDINATION DRAWINGS: REFLECTED CEILING PLANS, DRAWN TO SCALE, ON 1. PRODUCTS: SUBJECT TO COMPLIANCE WITH REQUIREMENTS:
<br /> B. FRAMING MEMBERS,GENERAL: COMPLY WITH ASTM C 754 FOR CONDITIONS B. SAMPLES: FOR THE FOLLOWING PRODUCTS: WHICH THE FOLLOWING ITEMS ARE SHOWN AND COORDINATED WITH EACH OTHER, a. BESTWORTH ROMMEL,I - PANELS.
<br /> INDICATED. 1. TEXTURED FINISHES: MANUFACTURER'S STANDARD SIZE FOR EACH TEXTURED BASED ON INPUT FROM INSTALLERS OF THE ITEMS INVOLVED: 2. CLASSIFICATION: UNPERFOOM IT o
<br /> 1. STEEL SHEET COMPONENTS: COMPLY WITH ASTM C 645 REQUIREMENTS FOR FINISH INDICATED AND ON SAME BACKING INDICATED FOR WORK. 1. CEILING SUSPENSION SYSTEM MEMBERS. 3. LINEAR MODULE WIDTH: [2..._..__,_. ....U)] [41NCHES(102 MM)][6 INCHES
<br /> METAL, UNLESS OTHERWISE INDICATED. 2. METHOD OF ATTACHING HANGERS TO BUILDING STRUCTURE. (152 MM)] [81NCHES(203 MM)j<INSERT DIMENSIONS>. ©zon srAaeucrcs COFFEE COMPANY
<br /> 2. PROTECTIVE COATING: COATING WITH EQUIVALENT CORROSION RESISTANCE 1.3 MATERIALS 3. CEILING-MOUNTED ITEMS INCLUDING LIGHTING FIXTURES, DIFFUSERS, GRILLES, 4. PAN DEPTH: [5/81NCH(16 MM)][3/4 INCH(19 MM)] [1 TO 1-1/2 INCHES
<br /> rn OF ASTM A 653/A 653M,G40 (Z120), HOT-DIP GALVANIZED, UNLESS OTHERWISE A. INTERIOR GYPSUM BOARD: SPEAKERS, SPRINKLERS,ACCESS PANELS,AND SPECIAL MOLDINGS. (25 TO 38 MM)] INSERT DEPTH>.
<br /> INDICATED. 1. GENERAL: COMPLYING WITH ASTM C 36/C 36M OR ASTM C 1396/C 1396M,AS C. SAMPLES FOR VERIFICATION: FOR EACH COMPONENT INDICATED AND FOR EACH 5. PAN FACE FINISH: [MILL][LACQUERED MILL][CLEAR ANODIZED] STARBUCKS COFFEE
<br /> = APPLICABLE TO TYPE OF GYPSUM BOARD INDICATED AND WHICHEVER IS MORE EXPOSED FINISH REQUIRED, PREPARED ON SAMPLES OF SIZE INDICATED BELOW. [CLEAR MIRROR-ANODIZED] [PAINTED] [FLUOROPOLYMER COATED] COMPANY
<br /> 1.3 STEEL FRAMING FOR FRAMED ASSEMBLIES STRINGENT. 1. ACOUSTICAL PANEL: SET OF FULL-SIZE SAMPLES OF EACH TYPE,COLOR, [BRIGHT REFLECTIVE]INSERT FINISH>.
<br /> A. SALVAGED MATERIAL: USE SALVAGED FRAMING MATERIALS WHENEVER AVAILABLE. a. MUST BE CERTIFIED AS LOW EMITTING. CERTIFICATION MUST BE BASED PATTERN,AND TEXTURE. &,/FILLER STRIP. 2401 UTAH AVENUE SOUTH
<br /> B. STEEL STUDS AND RUNNERS: ASTM C 645. UPON THE CALIFORNIA DEPARTMENT OF HEALTH SERVICES STANDARD 2. EXPOSED SUSPENSION SYSTEM MEMBERS, MOLDINGS,AND TRIM: SET OF SUSPENSION-SYSTEM MAIN-CARRIER MATERIAL: ALUMINUM. SEATTLE, WASHINGTON 98134
<br /> co 1. MINIMUM BASE-METAL THICKNESS: 0.033 INCH (0.84 MM) UNLESS PRACTICE FOR THE TESTING OF VOLATILE ORGANIC EMISSIONS FROM 12-INCH-(300-MM-) LONG SAMPLES OF EACH TYPE, FINISH, AND COLOR. //7
<br /> v OTHERWISE INDICATED ON DRAWINGS. VARIOUS SOURCES USING SMALL-SCALE ENVIRONMENTAL CHAMBERS, D. QUALIFICATION DATA: FOR TESTING AGENCY. (206) 318-1575
<br /> /END OF SECTION 095423
<br /> p D DEPTH: AS INDICATED ON DRAWINGS. INCLUDING 2004 ADDENDA OR A THODO OGIES AN RECOGNIZED STANDARD E. FIELD QUALITY-CONTROL TEST REPORTS. THESE DRAWINGS AND SPECIFICATIONS ARE
<br /> CL C. DIMPLED STEEL STUDS AND RUNNERS: USING EQUIVALENT TESTING METHODOLOGIES AND VOC THRESHOLDS. F. PRODUCT TEST REPORTS: BASED ON EVALUATION OF COMPREHENSIVE TESTS CONFIDENTIAL AND SHALL REMAIN THE SOLE
<br /> 1. MINIMUM BASE-METAL THICKNESS: 0.025 INCH (0.64 MM). 2. TYPE X: PERFORMED BY A QUALIFIED TESTING AGENCY, FOR EACH ACOUSTICAL PANEL
<br /> 2. DEPTH: AS INDICATED ON DRAWINGS. a. THICKNESS: 5/8 INCH (15.9 MM). CEILING. PROPERTY OF STARBUCKS CORPORATION,
<br /> Q D. SLIP-TYPE HEAD JOINTS: WHERE INDICATED, PROVIDE ONE OF THE FOLLOWING: b. LONG EDGES: TAPERED. G. MAINTENANCE DATA: FOR FINISHES TO INCLUDE IN MAINTENANCE MANUALS. FINISHES WHICH IS THE OWNER OF THE COPYRIGHT IN
<br /> n 1. SINGLE LONG-LEG RUNNER SYSTEM: ASTM C 645 TOP RUNNER WITH 3. MOISTURE-AND MOLD-RESISTANT TYPE:WITH MOISTURE-AND MOLD- THIS WORK. THEY SHALL NOT BE
<br /> 2-INCH-(50.8-MM-) DEEP FLANGES IN THICKNESS NOT LESS THAN INDICATED RESISTANT CORE AND SURFACES. 1.3 QUALITY ASSURANCE SECTION 096400 -WOOD FLOORING REPRODUCED (IN WHOLE OR IN PART),SHARED
<br /> to
<br /> o FOR STUDS, INSTALLED WITH STUDS FRICTION FIT INTO TOP RUNNER AND WITH a. CORE: 5/81NCH(15.9 MM),TYPE X. A. ACOUSTICAL PANEL QUALITY STANDARD: ASTM E 1264. 1.1 PERFORMANCE REQUIREMENTS WITH THIRD PARTIES OR USED IN ANY MANNER
<br /> 00 CONTINUOUS BRIDGING LOCATED WITHIN 12 INCHES (305 MM) OF THE TOP OF b. LONG EDGES: TAPERED. B. METAL SUSPENSION SYSTEM QUALITY STANDARD: ASTM C 635. A. FLOORSCORE COMPLIANCE: COMPOSITE WOOD FLOORS SHALL COMPLY WITH ON OTHER PROJECTS OR EXTENSIONS TO THIS
<br /> STUDS TO PROVIDE LATERAL BRACING. c. MOLD RESISTANCE: ASTM D 3273, SCORE OF 10 AS RATED ACCORDING TO REQUIREMENTS OF FLOORSCORE STANDAR/ PROJECT CONSENT WWII HOOT THE PRIOR COR ORATION.
<br /> WRITTEN
<br /> LO 2. DOUBLE-RUNNER SYSTEM: ASTM C 645 TOP RUNNERS, INSIDE RUNNER WITH ASTM D 3274. 1.4 MATERIALS OMIT THESE DRAWINGS AND SPECIFICATIONS ARE
<br /> NC13 2-INCH-(50.8-MM-) DEEP FLANGES IN THICKNESS NOT LESS THAN INDICATED B. TILE-BACKING PANELS: A. ACOUSTICAL CEILING PANELS GENERAL:MUST BE CERTIFIED AS LOW EMITTING. 1.2 MATERIALS INTENDED TO EXPRESS DESIGN INTENT FOR A
<br /> FOR STUDS AND FASTENED TO STUDS,AND OUTER RUNNER SIZED TO FRICTION 1. GLASS-MAT,WATER-RESISTANT BACKING BOARD: ASTM C 1178/C 1178M,WITH CERTIFICATION MUST BE BASED UPON THE CALIFORNIA DEPARTMENT OF HEALTH A. ACCESSORIES: PROTOTYPICAL STARBUCKS STORE(WHICH IS
<br /> FIT INSIDE RUNNER. MANUFACTURER'S STANDARD EDGES. SERVICES STANDARD PRACTICE FOR THE TESTING OF VOLATILE ORGANIC 1. WOOD FLOORING ADHESIVE: VOC LIMITS: 10\
<br /> 401 3. DEFLECTION TRACK: STEEL SHEET TOP RUNNER MANUFACTURED TO PREVENT a. MUST BE CERTIFIED AS LOW EMITTING. CERTIFICATION MUST BE BASED EMISSIONS FROM VARIOUS SOURCES USING SMALL-SCALE ENVIRONMENTAL SUBJECT TO CHANGE AT ANYTIME)AND DO
<br /> CRACKINGCO OF FINISHES APPLIED TO INTERIOR PARTITION FRAMING RESULTING UPON THE CALIFORNIA DEPARTMENT OF HEALTH SERVICES STANDARD CHAMBERS INCLUDING 20 4 ADDENDA OR A JURISDICTIONALLY RECOGNIZED
<br /> NOT REFLECT ACTUAL SITE CONDITIONS.
<br /> 0 END OF SECTION 096400 NEITHER PARTY SHALL HAVE ANY OBLIGATION
<br /> FROM DEFLECTION OF STRUCTURE ABOVE IN THICKNESS NOT LESS THAN PRACTICE FOR THE TESTING OF VOLATILE ORGANIC EMISSIONS FROM STANDARD USING EQUIVALENT TESTING METHODOLOGIES AND VOC THRESHOLDS.
<br /> INDICATED FOR STUDS AND IN WIDTH TO ACCOMMODATE DEPTH OF STUDS. VARIOUS SOURCES USING SMALL-SCALE ENVIRONMENTAL CHAMBERS, B. ACOUSTICAL CEILING PANELS WASHABLE / NOR LIABILITY TO THE OTHER(EXCEPT STATED
<br /> M E. COLD-ROLLED CHANNEL BRIDGING: 0.0538-INCH (1.37-MM) BARE-STEEL THICKNESS, INCLUDING 2004 ADDENDA OR AJURISDICTIONALLY RECOGNIZED STANDARD 1. CLASSIFICATION: TYPE IV, MINERAL BASE WITH MEMBRANE-FACED OVERLAY; ABOVE) UNTILA WRITTEN AGREEMENT IS
<br /> WITH MINIMUM 1/2-INCH-(12.7-MM-)WIDE FLANGES. USING EQUIVALENT TESTING METHODOLOGIES AND VOC THRESHOLDS. FORM 2,WATER FELTED;WITH VINYL OVERLAY ON FACE; PATTERN G(SMOOTH). FINISHES FULLY EXECUTED BY BOTH PARTIES.
<br /> 1. DEPTH: 1-1/2 INCHES(38.1 MM). b. CORE: 5/8 INCH (15.9 MM),TYPE X. 2. COLOR:AS INDICATED ON DRAWINGS.
<br /> Q 2. CLIP ANGLE: NOT LESS THAN 1-1/2 BY 1-1/2 INCHES (38.1 BY 38.1 MM), c. MOLD RESISTANCE: ASTM D 3273, SCORE OF 10 AS RATED ACCORDING TO 3. THICKNESS: 518 INCH (15 MM). SECTION 096516-RESILIENT SHEET FLOORING STARBUCKS TEMPLATE VERSION 12017.05.18
<br /> 0.068-INCH- (1.73-MM-)THICK,GALVANIZED STEEL. ASTM D 3274. 4. MODULAR SIZE: 24 BY 48 INCHES(610 BY 1220 MM).
<br /> p F. HAT-SHAPED, RIGID FURRING CHANNELS: ASTM C 645. 2. CEMENTITIOUS BACKER UNITS: ANSI A118.9 AND ASTM C 1288 OR 1325,WITH 5. BROAD SPECTRUM ANTIMICROBIAL FUNGICIDE AND BACTERICIDE TREATMENT: 1.1 PRODUCTS
<br /> U 1. MINIMUM BASE METAL THICKNESS: AS INDICATED ON DRAWINGS. MANUFACTURER'S STANDARD EDGES. PROVIDE ACOUSTICAL TILES TREATED WITH MANUFACTURER'S STANDARD A. FLOORING SYSTEM: FLOORSCORE COMPLIANCE.
<br /> 0 2. DEPTH: AS INDICATED ON DRAWINGS. a. THICKNESS: (1/4 INCH(6.4 MM)][AS INDICATED]. ANTIMICROBIAL FORMULATION THAT INHIBITS FUNGUS, MOLD, MILDEW,AND B. VINYL SHEET FLOORING: • - , - ,
<br /> M G. COLD-ROLLED FURRING CHANNELS: 0.0538-INCH (1.37-MM) BARE-STEEL THICKNESS, b. MOLD RESISTANCE: ASTM D 3273, SCORE OF 10 AS RATED ACCORDING TO GRAM-POSITIVE AND GRAM-NEGATIVE BACTERIA AND SHOWING NO MOLD, 1. BACKING: NONE, UNBACKED.
<br /> WITH MINIMUM 1/2-INCH-(12.7-MM-)WIDE FLANGES. ASTM D 3274. MILDEW,OR BACTERIAL GROWTH WHEN TESTED ACCORDING TO ASTM D 3273 2. SEAMLESS-INSTALLATION METHOD: HEAT WELDED.
<br /> y 1. DEPTH: AS INDICATED ON DRAWINGS. C. TRIM ACCESSORIES: AND EVALUATED ACCORDING TO ASTM D 3274 OR ASTM G 21. C. RUBBER SHEET FLOORING:
<br /> c 2. FURRING BRACKETS: ADJUSTABLE, CORRUGATED-EDGE TYPE OF STEEL SHEET a. INTERIOR: CORNERBEAD. C. ACOUSTICAL CEILING PANELS TEXTURED: 1. BACKING: NONE, UNBACKED. 5858 Wilshire Blvd #200 T: 323.954.8996
<br /> WITH MINIMUM BARE-STEEL THICKNESS OF 0.0312 INCH (0.79 MM). 1. CLASSIFICATION: TYPE III, MINERAL BASE WITH PAINTED FINISH; FORM 2,WATER 2. SEAMLESS-INSTALLATION METHOD: HEAT WELDED.
<br /> E 3. TIE WIRE: ASTM A 641/A 641M, CLASS 1 ZINC COATING, SOFT TEMPER, END OF SECTION 092900 FELTED; PATTERN E(LIGHTLY TEXTURED). D. INSTALLATION MATERIALS: LOS Angeles, CA 90036 F: 323.954.8965
<br /> 0 0.0625-INCH-(1.59-MM-) DIAMETER WIRE,OR DOUBLE STRAND OF 2. COLOR:AS INDICATED ON DRAWINGS. E. TROWELABLE LEVELING AND PATCHING COMPOUNDS: LATEX-MODIFIED,PORTLAND www.valerloinc.com • info@valerioinc.com
<br /> 0.0475-INCH-(1.21-MM-) DIAMETER WIRE. 3. THICKNESS: 5/8 INCH (15 MM). CEMENT BASED OR BLENDED HYDRAULIC-CEMENT-BASED FORMULATION PROVIDED
<br /> C H. Z-SHAPED FURRING: WITH SLOTTED OR NONSLOTTED WEB, FACE FLANGE OF 4. MODULAR SIZE: 24 BY 48 INCHES(610 BY 1220 MM). OR APPROVED BY RESILIENT SHEET FLOORING MANUFACTURER FOR APPLICATIONS ARCHITECT
<br /> O 1-1/4 INCHES (31.8 MM),WALL ATTACHMENT FLANGE OF 7/8 INCH (22.2 MM), MINIMUM FINISHES 5. BROAD SPECTRUM ANTIMICROBIAL FUNGICIDE AND BACTERICIDE TREATMENT: INDICATED. OF RECORD 4,� ARC',�t`
<br /> E9 BARE-METAL THICKNESS OF 0.0179 INCH(0.45 MM),AND DEPTH REQUIRED TO FIT PROVIDE ACOUSTICAL TILES TREATED WITH MANUFACTURER'S STANDARD F. ADHESIVES: WATER-RESISTANT TYPE RECOMMENDED BY FLOORING AND `,O"O V- `rf�
<br /> INSULATION THICKNESS INDICATED. ANTIMICROBIAL FORMULATION THAT iNHIBITS FUNGUS, MOLD,MILDEW, AND ADHESIVE MANUFACTURERS TO SUIT RESILIENT SHEET FLOORING AND SUBSTRATE
<br /> V5 SECTION 093000-TILING GRAM-POSITIVE AND GRAM-NEGATIVE BACTERIA AND SHOWING NO MOLD, CONDITIONS INDICATED. U 2 LIC. NO.�� tt
<br /> Co END OF SECTION 092216 1.1 SUMMARY MILDEW,OR BACTERIAL GROWTH WHEN TESTED ACCORDING TO ASTM D 3273 1. VINYL SHEET ADHESIVES SHALL HAVE A VOC CONTENT OF 50 G/L OR LESS. .+ C24228 H
<br /> U A. PAVER,GLAZED, AND WALL TILE. AND EVALUATED ACCORDING TO ASTM D 3274 OR ASTM G 21. 2. RUBBER SHEET ADHESIVES SHALL HAVE A VOC CONTENT OF 60 G/L OR LESS. EXPIRES
<br /> B. WATERPROOF MEMBRANE FOR THIN-SET TILE INSTALLATIONS. D. ACOUSTICAL CEILING PANELS PERFORATED: G. INTEGRAL-FLASH-COVE-BASE ACCESSORIES: j, 7-31-19 e
<br /> o C. METAL EDGE STRIPS INSTALLED AS PART OF TILE INSTALLATIONS. 1. CLASSIFICATION: TYPE III, MINERAL BASE WITH PAINTED FINISH; FORM 2, 1. COVE STRIP: 1-INCH (25-MM) RADIUS PROVIDED OR APPROVED BY RESILIENT N ,Or , 4
<br /> INISH ES WATER FELTED;PATTERN CE (PERFORATED,SMALL HOLES AND LIGHTLY SHEET FLOORING MANUFACTURER. CHL14p
<br /> M 1.2 QUALITY ASSURANCE TEXTURED). 2. CAP STRIP: [SQUARE METAL,VINYL,OR RUBBER CAP] rrAPERED VINYL CAP]
<br /> SECTION 092400-PORTLAND CEMENT PLASTERING A. MOCKUPS FOR EACH FORM OF CONSTRUCTION. 2. COLOR:AS INDICATED ON DRAWINGS. PROVIDED OR APPROVED BY RESILIENT SHEET FLOORING MANUFACTURER.
<br /> 00 3. THICKNESS: T4lNCH(15 MM). 3. FLOOR POLISH: PROVIDE PROTECTIVE, LIQUID FLOOR-POLISH PRODUCTS
<br /> Mo 1.1 SUBMITTALS 1.3 MATERIALS 4. MODULAR SIZE: 24 BY 481NCHES(610 BY 1220 MM). RECOMMENDED BY RESILIENT SHEET FLOORING MANUFACTURER.
<br /> �I A. NPRODUCT DATA: FOR EACH TYPE OF PRODUCT INDICATED. A. GLAZED WALL TILE TRIM SHAPES: COVED BASE, BULLNOSE CAP. 5. BROAD SPECTRUM ANTIMICROBIAL FUNGICIDE AND BACTERICIDE TREATMENT:
<br /> M B. SAMPLES FOR VERIFICATION: FOR EACH TYPE OF FACTORY-PREPARED FINISH B. THRESHOLDS: SATIN ANODIZED ALUMINUM THRESHOLDS AND TRANSITION STRIPS. PROVIDE ACOUSTICAL TILES TREATED WITH MANUFACTURER'S STANDARD END OF SECTION 096516
<br /> COAT INDICATED; 12 BY 12 INCHES(305 BY 305 MM),AND PREPARED ON RIGID 1. BEVEL EDGES AT 1:2 SLOPE,WITH LOWER EDGE OF BEVEL ALIGNED WITH OR ANTIMICROBIAL FORMULATION THAT INHIBITS FUNGUS,MOLD, MILDEW,AND
<br /> NBACKING. / UP TO 1/16 INCH (1.5 MM)ABOVE ADJACENT FLOOR SURFACE. FINISH BEVELTO GRAM-POSITIVE AND GRAM-NEGATIVE BACTERIA AND SHOWING NO MOLD,
<br /> I MATCH TOP SURFACE OF THRESHOLD. LIMIT HEIGHT OF THRESHOLD TO MILDEW,OR BACTERIAL GROWTH WHEN TESTED ACCORDING TO ASTM D 3273
<br /> d 1.2 MATERIALS\ 1/2 INCH (12.7 MM)OR LESS ABOVE ADJACENT FLOOR SURFACE. AND EVALUATED ACCORDING TO ASTM D 3274 OR ASTM G 21. FINISHES Lr
<br /> A. METAL LATH:, C. MORTAR: LATEX-PORTLAND CEMENT E. METAL SUSPENSION SYSTEMS: N
<br /> CI 1. EXPANDED-METAL LATH: SELF-FURRING DIAMOND-MESH WITH HOT-DIP D. ELASTOMERIC SEALANTS: ONE-PART, MILDEW-RESISTANT SILICONE. 1. WIDE-FACE, CAPPED, DOUBLE-WEB STEEL: INTERMEDIATE DUTY. SECTION 096813-TILE CARPETING Q �
<br /> GALVANIZED-ZINC COATING. 1. SEALANTS SHALL HAVE A VOC CONTENT OF 250 G/L OR LESS WHEN F. METAL EDGE MOLDINGS AND TRIM: ROLL-FORMED SHEET METAL.
<br /> C 2. WELDED-WIRE LATH: SELF-FURRING. / CALCULATED ACCORDING TO 40 CFR 59, SUBPART D (EPA METHOD 24). 1.1 QUALITY ASSURANCE LU
<br /> 3. PAPER BACKING: PROVIDE AT EXTERIOR LOCATIONS. 1.5 INSTALLATION A. PRODUCTS COMPLY WITH REQUIREMENTS OF CRI'S GREEN LABEL INDOOR AIR
<br /> B. ACCESSORIES: 1.4 FLOOR TILE INSTALLATION SCHEDULE A. INSTALLATION: ASTM C 636. QUALITY TESTING PROGRAM. � Q
<br /> N 1. FOUNDATION WEEP SCREED: HOT-DIP GALVANIZED STEEL SHEET. A. INTERIOR FLOORS ON CONCRETE: THIN-SET MORTAR. 0
<br /> `p 2. CORNERITE: FABRICATED FROM METAL LATH WITH HOT-DIP GALVANIZED-ZINC 1. TILE TYPE: UNGLAZED PAVER TILE. 1.6 FIELD QUALITY CONTROL 1.2 WARRANTY x >_ z
<br /> N COATING. / 2. MORTAR: LATEX- PORTLAND CEMENT MORTAR BOND COAT. A. TESTING: BY OWNER-ENGAGED AGENCY TO TEST ACOUSTICAL PANEL CEILING A. CARPETTILE: ONEYEAR. O6
<br /> �I 3. EXTERNAL-OUTSIDE-CORNER REINFORCEMENT: FABRICATED FROM METAL 3. GROUT: POLYMER-MODIFIED UNSANDED 100%SOLIDS EPDXY NON-SAGGING HANGER FASTENERS.
<br /> LATH WITH HOT-DIP GALVANIZED-ZINC COATING. GROUT. 1.3 MATERIALS0 = O
<br /> 4. CASING BEADS:FABRICATED FROM ZINC OR ZINC-COATED (GALVANIZED) STEEL; B. INTERIOR FLOORS ON[WATERPROOF][CRACK-SUPPRESSION] MEMBRANE OVER END OF SECTION 095113 A. ADHESIVES: WATER-RESISTANT, MILDEW-RESISTANT, NONSTAINING,
<br /> Ste' SQUARE-EDGED STYLE;WITH EXPANDED FLANGES. CONCRETE AND WOOD: THIN-SET MORTAR. PRESSURE-SENSITIVE TYPE TO SUIT PRODUCTS AND SUBFLOOR CONDITIONS Q uj LU Y
<br /> 2 5. CONTROL JOINTS: FABRICA' JC OR ZINC COATED (GALVANIZED) 1. TILE TYPE: UNGLAZED PAVER TILE. INDICATED,THAT COMPLIES WITH FLAMMABILITY REQUIREMENTS FOR INSTALLED O U) U
<br /> -Ol STEEL; ONE-PIECE-TYPE, F(O M I TIF UNPERFORATED SCREEDS IN M- 2. MORTAR: LATEX- PORTLAND CEMENT MORTAR BOND COAT. CARPET TILE AND IS RECOMMENDED BY CARPET TILE MANUFACTURER FOR LUM LU Q [U O
<br /> N SHAPED CONFIGURATION;V..... . _... ...ATED FLANGES AND REMOVABLE 3. GROUT: POLYMER-MODIFIED UNSANDED 100%SOLIDS EPDXY NON-SAGGING RELEASABLE INSTALLATION. LU rr m
<br /> l PROTECTIVE TAPE ON PLASTER FACE OF CONTROL JOINT. GROUT. a. VOC LIMITS: 50 G/L Q p (n Q w
<br /> cc TJ 6. EXPANSION JOINTS: FABRICATED FROM ZINC OR ZINC-COATED (GALVANIZED) Z Q
<br /> 0 STEEL; FOLDED PAIR OF UNPERFORATED EDS IN M-SHAPED 1.5 WALL
<br /> INSTALLATION
<br /> 0= CONFIG RATION;WITH EXPANDED FLANGES\ A. INTERIOR WAL SOVER GLASS-MAT WATER-RESISTANT BACKER BOARD OR 1.4 A. INSTALLATION METHOD: GLUE DOWN WITH RELEASABLE ADHESIVE. U U U Z 0
<br /> sl 7. TWO-PIECE EXPANSION JOINTS: FABRICATED FROM ZINC OR ZINC-COATED CEMENTITIOUS BACKER UNITS: THIN-SET MORTAR. LUMM ' Lf) O Q
<br /> (GALVANIZED)STEEL; FORMED TO PRODUCE SLIP-JOINT AND SQUARE-EDGED 1. MORTAR: LATEX- PORTLAND CEMENT MORTAR. END OF SECTION D96813 O LL O
<br /> Q REVEAL THAT IS ADJUSTABLE FROM 1/4 TO 5/8 INCH(6 TO 16 MM)WIDE;WITH 2. GROUT: POLYMER-MODIFIED UNSANDED GROUT SUPPLIED BY GC. CC < I LL O
<br /> y LL Ir
<br /> PERFORATED FLANGES. O. d
<br /> Y C. FIBER FOR BASE COAT: ALKALINE-RESISTANT GLASS OR POLYPROPYLENE 1.6 INSTALLATION
<br /> FIBERS, 1/21NCH(13 MM) LONG, FREE OF CONTAMINANTS,MANUFACTURED FOR A. ALL TILE AND SLATE TO BE INSTALLED PER TILE COUNCIL OF AMERICA STANDARDS. STORE #: 10183
<br /> USE IN CEMENT PLASTER.
<br /> 15
<br /> M D. WIRE:ASTM A,641/A 641M, CLASS 1 ZINC COATING,SOFT TEMPER, NOT LESS THAN END OF SECTION 093000 PROJECT #: 27237-038
<br /> 0.0475-INCH (1.21-MM) DIAMETER UNLESS OTHERWISE INDICATED.
<br /> E. PLASTER MATERIALS: PORTLAND CEMENT WITH SAND AGGREGATE. CASEWORK CONCEPT:
<br /> F. COLORANTS FOR JOB-MIXED FINISH COATS:COLORFAST MINERAL PIGMENTS THAT ISSUE DATE:
<br /> PRODUCE FINISH PLASTER COLOR. DESIGN MANAGER: M. MONTENEGRO
<br /> LO
<br /> G. PLASTER MIXES:ASTM C 926. LEEDO AP:
<br /> ym 1.3 INSTALLATION: PROGRAM MANAGER:
<br /> %PLASTER FINISH COATS:APPLY TO PROVIDE SMOOTH TEXTURED FINISH. CHECKED BY: VALERIO
<br /> U
<br /> END OF SECTION 092400
<br /> Revision Schedule
<br /> a
<br /> 00 Rev Date By Description
<br /> 0 05-23-18 SS 90 PERCENT CD SET
<br /> cy. 06-06-18 SS 1 ST SUBMITTAL SET
<br /> }
<br /> 1
<br /> 2
<br /> 3
<br /> SHEET TITLE:
<br /> OUTLINE
<br /> SPECIFICATIONS
<br /> C0 SCALE:AS SHOWN
<br /> SHEE NUMBER:N
<br /> W
<br /> G-0015
<br />
|