INSTALL_2019 - Laserfiche WebLink

Home Browse Search

Maximize protection vacuum monitored secondary containment system. A Secondary Containment Vacuum Sensing System for use with Veeder- Root's ATG Systems. The Secondary Containment Vacuum Sensing (SCVS) System is designed to detect leaks in double - walled tanks and piping systems while helping to contain a release of product while under vacuum. The system consists of: Vacuum Sensors, connected to tank, sump or piping interstices A Submersible Turbine Pump (STP), to provide a source of vacuum A Smart Sensor Interface with Embedded Pressure Module in a TLS -350 Monitoring System The Vacuum Sensor is interfaced to Veeder- Root's TIS -350 Monitoring System via intrinsically safe wiring to provide system status, replenish rate, alarm, and diagnostic information. Vacuum Sensor Kits are available in a variety of models: • For monitoring double -walled piping and sump interstices • For monitoring double -walled steel tank interstices (see back page) • For double -walled fiberglass tanks These kits differ in the number of vacuum sensors and the configuration of associated liquid sensors. An inline kit mounted liquid sensor is used for Vacuum Sensors monitoring piping and sumps. An external liquid sensor (to be installed in the secondary space at the bottom of the tank) is provided with onec ensors h steel and fiberptj; � - er0 lg-D MY1.�:ON:�'i1=4 TAT FFD LT '6 r PERM ITIS E: 10ES Features and Benefits Satisfy Re uirements • i to meet Califoaria's tequneinent for seronda¢y ssppaace momtorurg for tams and lines as zegizQedbyAB 24$1 • Satisfies the regcmffilents for Class I Irak Detection as defined by theErugpean Standard EN 13160-2 • Id Party,, National Mkirk Grip and LG113 listed Reduce Exposure to. Risk • Alarms when vacuum cannot be maintained orwber replenish rate ex Beds 85liters per hour • The system alamiswhen liquid is detected in the st coon y spay Operating Temperature Rating: 25 degrees C to +70 degrees C Cable Length: 8 feet Sensor Dimensions: 5' high x 5" wide 2' deep Fachmes periodic operability testing Leverage Existing Veeder--Root Systems • Uses SIP as the varanim source and worts with Red Jacket and FE SIPS • ksmis in the SIP st>mp and connects w the console via intiinsically safe wiring • Able to share wiring conduit with other Needer-Root intrinsically safe (LS) probes and sensors including suIIrp or line leak sensors • Interfaces to the Smart Sensor Interfacewith Embedded Press=Module • Provides for positive shut down of prtnurized • Smiple mstallation, no need to mess with brine Console Capability The Vacuum Sensor is compatible with the following consoles: console TLS-350R/EMC w/BIR' TLS -350 Plus/EMC Enhanced` TLS-350/EMC' 'Upgrade Note: The Vacuum Sensor System requires the console to have version 24C software (or greater) along with an ECPU2 or ECPU w/ NVMEM 1 board. Standard Models Veeder-Root P/N Description A46essorles.Part Description- Quantity/Length Part Number 1/4" NPT Barbed Rttfngs 3 330020-487 VacuumHose100' _ -___.._10Q_....__.____.._.__._ ------ _.332310-.1003_._.._._ 3 -Way Ball Valve 1 576008-649 Schrader Valve Barbed Fitting 3 330020-496 Schrader Valve Barbed Felting 15 330020-497 ' Kits include mounting bradaet, 6' of vacuum hose, relief valve assembly (if required) and the appropriate number of liquid sensors, 3 -way baR valves, barbed fittings and hose clangs so that each vacuum sensor can monitor a single tank, sump or piping interstices. The Vacuum Sensing System requires one 7 channel Smart Sensor Interface with Embedded Pressure Module, 8 channel Smart Sensor Modules (p/n 329356-004) can be used for Vacuum Sensors eight and above. For more information Call: 1-888-561-7942 VEEDER-ROOT