Laserfiche WebLink
Analytical Laboratory Division <br /> 1 SPf6chnology. <br /> arger Mobile Laboratory Dmsion <br /> OScientific Divisionon <br /> ' With Automation in Mind <br /> ' II{ Qua{t Control <br /> A. Project Specific_ C. No project specific QC (i e , spikes and/or <br /> duplicates) was requested <br /> B. Method Blank Results. �eefto which laboratory operations laboratory-generated <br /> and <br /> ' sample which assesses the gee <br /> procedures cause false-positive analytical results for your sample <br /> ' No target parameters were detected in the method blank associated with <br /> your sample at the reporting limit levels noted on the data sheets in the <br /> Analytical Results section <br /> C. Labo F Control Spike known analyte concentrations,Laboratory <br /> and analyzed <br /> sample which is spiked with Yt oncentrat <br /> at approximately 10% of the sample load in order to LCS results associated with your ish method- <br /> specific control limits The samples are <br /> on the attached Laboratory Control Spike and Laboratory Control Spike <br /> Duplicate Analysis Report <br /> ' D. Matrix Spike Results. A Mated Spike <br /> zed at approximately 10% of the <br /> known analyte concentrations, Y <br /> sample load in order to es'abeidstwmethod-specific samples control are onlimits The <br /> the attached <br /> Matrix Spike results assoc your <br /> Matrix Spike and Matrix Spike Duplicate Analysis Report <br /> ' Accuracy is measured by Percent Recovery as in <br /> ' % recovery = measured concentration x 100 <br /> (actual concentration) <br /> ' <br /> IV Anal y sts Results <br /> ' Results are on the attached data sheets <br /> • <br /> ' <br /> 3050 Fite Circle Suite 112 • Sacramento California 95827 • (946) 362-8947 • FAX (996) 362-0947 <br />