WORK PLANS - Laserfiche WebLink

Home Browse Search

f C C f C [ [ r C C [ C C C t C [ C C Mike Philipp, at(699) 296-6995X240 office/(699) 200-8398 cell, for guidance on the air monitoring requirements. • These values can be modified with particular knowledge of contaminants and site conditions. Contact Director of Industrial Hygiene & Health and Safety, Philip Platcow to discuss (617) 232-7355. • On sites impacted with chemicals other Petroleum products, contact Phil Platcow, Director of IH/H& S, at(697) 232-7355 office/ (617)899-5403 cell or Mike Philipp, at(619) 296-6995-Ext 240 office/(619) 200-8398 cell, for guidance on the air monitoring requirements. CHEMICAL MONITORING MONITORING LEVEL FOR RESPIRATOR LEVEL FOR WORK LOCATION (OR CLASS) EQUIPMENT TASK FREQUENCY/ LOCATION USE STOPPAGE Volatile-FID/PID as appropriate From start of Sampling should be Respirator to be used will be Stop work at 25 ppm Organic for chemicals of mobilization to continuous during the full-face piece respirator on the PID/FID. Vapors concern. Read manual completion and project while disturbing with organic vapor/P 100 to determine. demobilization potentially contaminated soil combination cartridges. Continuously attempt or uncovering/removing to determine cause tanks and piping, or during The level for respirator use of exposure and drilling. At least every 15 will be 5ppm on the usage of engineering minutes in the breathing PID/FID. controls to attempt to zone. never reach the stop At donning respirator level, work level. ; Sample at the exclusion determine cause of zone boundaries every 30 exposure and implement minutes. engineering controls to reduce concentrations. VOCs FID/PID as appropriate From start of Sampling should be The level for respirator use Stop work at 25 ppm for chemicals of mobilization to continuous during the will be 5ppm on the on the PID/FID. concern. Read manual completion and project while disturbing PID/FID.At donning Continuously attempt to determine. demobilization potentially contaminated soil respirator level, determine to determine cause Manuf: or uncoveringlremoving cause of exposure and of exposure and Model: tanks and piping, or during implement engineering usage of Serial: drilling. At least every 15 controls to reduce engineering controls minutes in the breathing concentrations. to attempt to never zone. Sample at the reach the stop work exclusion zone boundaries level every 30 minutes. Continuously sample during each soil and groundwater sampling interval. I STANTEC Consulting Corporation 11-4