WORK PLANS - Laserfiche WebLink

Home Browse Search

9k KLEINFELDER alcohol followed by a distilled water rinse prior to use. New, factory-sterilized syringe needles, O-rings, septums and sample tubes are used for each sample. A-2.6 Sample Handling After labeling, the sample is immediately stored in an iced cooler for transport to Kleinfelder's office sample control or to the analytical laboratory. A Kleinfelder chain-of-custody form accompanies the cooler. The chain-of-custody form includes Kleinfelder's name, address and telephone number, the employee number of the individual who performed the sampling, the sample numbers, the date and time the samples were collected, the number of containers each sample occupies, the sample matrix (soil or water) and the analyses for which the samples are being submitted, if any. The chain-of-custody form is signed by each person who handles the samples, including all Kleinfelder employees and the receiving employee of office sample control or the analytical laboratory when the samples are delivered. A-2.7 Decontamination of Equipment To reduce the potential for cross-contamination, augers and associated equipment are steam cleaned prior to drilling each boring. In addition, sampling equipment is cleaned with a trisodium phosphate or non-phosphate detergent wash and rinsed with distilled water prior to collecting each soil sample. A-2.8 Soil Boring Closure and Cutting Disposal Soil borings are closed immediately after the collection and logging of soil samples. Closure is accomplished by grouting the boring with a cement/bentonite slurry or as otherwise required. Drill cuttings will be placed in 55-gallon drums wrapped in plastic or spread around the boring and left on site for disposal by the site owner. If requested, Kleinfelder can coordinate disposal of soil and water after analytical results are available. A-3 GROUNDWATER WELL INSTALLATION A-3.1 Monitoring Well Construction Construction details for shallow groundwater monitoring wells are as follows: • The well casing are 2- or 4-inch inside diameter, flush threaded joint, schedule 40 PVC pipe. • The wells are constructed in 6- or 8-inch diameter borings. • Well screen sections are perforated with 0.010- or 0.020-inch factory-cut slots. 34091.E01/ST05R040/JZ:ly Page A-3 ©2005,Kleinfelder,Inc. January 13,2005