Laserfiche WebLink
'1 Attachment B <br /> TAIL-GATE PRE-FIELD BRIEFING AND SAFETY PLAN REVIEW <br /> Purpose of Field Work and Site Details <br /> 1. Review purpose and scope of work <br /> 2- Review anticipated contamination and concentrations <br /> 3. Review location of former tanks, known depth to water, flow <br /> direction <br /> 4. Locate emergency shat-off switch <br /> 5. Locate water shut-off valve <br /> Safejy Plan Review <br /> 1. Review chemical hazards (PELs) and exposure limiting controls: <br /> • air in breathing zones will be monitored (Level C : OVs x'300 ppm) <br /> • no eating, drinking, smoking and chewing while in the work area <br /> • work gloves should be worn in the work area <br /> I 2. Identify physical hazards: <br /> _ • traffic <br /> • burns <br /> • noise (CAL-OSHA.PEL is 90 dB) <br /> visibility, hearing and dexterity (may be impaired by PPE) <br /> (� 3_ Be aware of heat stress if temperature X80 dgrees farenheit <br /> 4. Identzfy.possible.fare.hazards and electrical hazards <br /> 5. Review PPE: Level D to be worn at all times <br /> • steel toe boots <br /> • - safety glasses <br /> • hard hat <br /> • long pants <br /> • impermeable gloves and long sleeves may be required <br /> 6. Modified Level C PPE should be available at all times: <br /> • half-face respirator with organic vapor cartridges (to be used if orgaric <br /> vapors > 300 ppm) <br /> • Hearing protection <br /> 7. Review site control plan (decontamination & exclusion zones) <br /> 8. All field personnel should have completed 40-hour OSHA-SADA <br /> training <br /> 9_ All field personnel should be in their company's Medical Surveillance <br /> p rograrn <br /> 10. Review emergency procedures and directions to nearest hospital <br /> !�l <br /> II <br />