Laserfiche WebLink
APPENDIX A <br /> SAMPLING AND ANALYSIS PROCEDURES <br /> The sampling and analysis procedures for water quality monitoring programs are <br /> contained in this appendix. The procedures provided for consistent and reproducible <br /> sampling methods, proper application of analytical methods, and accurate and precise <br /> analytical results. Finally, these procedures provided guidelines so that the overall <br /> objectives of the monitoring program were achieved. <br /> The following documents have been used as guidelines for developing these procedures: <br /> Procedures Manual for Groundwater Monitoring at Solid Waste Disposal <br /> Facilities, Environmental Protection Agency (EPA)-530/SW-611, August 1977 <br /> ° Resource Conservation and Recovery Act (RCRA) Groundwater Monitoring <br /> Technical Enforcement Guidance .Document, Office of Solid Waste and <br /> Emergency Response (OSWER) 9950.1, September 1986 <br /> ° Test Methods for Evaluating Solid Waste: Physical/Chemical Methods, EPA <br /> SW-846, 3rd edition, November 1086 <br /> • Methods for Organic Chemical Analysis of Municipal and Industrial Waste <br /> Water, EPA-600/4782-057, July 1982 <br /> • Methods for Organic Chemical Analysis of Water and Wastes, EPA-600/4-79- <br /> 020, revised March 1983 <br /> • Leaking Underground Fuel Tank (LUFT) Field Manual, California State Water <br /> Resources Control Board, revised October 1989 <br /> Sample Collection <br /> Sample collection procedures.include equipment cleaning, water level and total well depth <br /> measurements, and well purging and sampling. <br /> SAC D:\QMRIARCO\ISTQ99\2186Q199.DOC-981sg:1 A-1 Rev.0,4/26/99 <br />