Laserfiche WebLink
• <br /> APPENDIX A <br /> SAMPLING AND ANALYSIS PROCEDURES <br /> The sampling and analysis procedures for water quality monitoring programs are <br /> contained in this appendix. The procedures provided for consistent and reproducible <br /> sampling methods, proper application of analytical methods, and accurate and precise <br /> analytical results. Finally, these procedures provided guidelines so that the overall <br /> objectives of the monitoring program were achieved. <br /> The following documents have been used as guidelines for developing these procedures: <br /> a Procedures Manual for Groundwater Monitoring at Solid Waste Disposal <br /> Facilities, Environmental Protection Agency (EPA)-530/SW-611, August 1977 <br /> iY Resource Conservation and Recovery Act (RCRA) Groundwater Monitoring <br /> Technical Enforcement Guidance Document, Office of Solid Waste and <br /> Emergency Response (OSWER) 9950.1, September 1986 <br /> Test Methods for Evaluating Solid Waste: Physical/Chemical Methods, EPA <br /> SW-846, 3rd edition, November 1986 <br /> • Methods for Organic Chemical Analysis of Municipal and Industrial Waste <br /> Water, EPA-600/4-82-057, July 1982 <br /> • Methods for Organic Chemical Analysis of Water and Wastes, EPA-600/4-79- <br /> 020, revised March 1983 <br /> Leaking Underground Fuel Tank (LUFT) Field Manual, California State Water <br /> Resources Control Board, revised October 1989 <br /> Sample Collection <br /> Sample collection procedures include equipment cleaning, water level and total well depth <br /> measurements, and well purging and sampling. <br /> i <br /> sAC1D:\QMA13RDQTR-1\2186Q398.DOC-981sg;1 A-1 Rev.0, 11/30/98 <br />