Laserfiche WebLink
• <br /> APPENDIX A <br /> SAMPLING AND ANALYSIS PROCEDURES <br /> The sampling and analysis procedures for water quality monitoring programs are contained <br /> in this appendix. The procedures provided for consistent and reproducible sampling <br /> methods, proper application of analytical methods, and accurate and precise analytical <br /> results. Finally, these procedures provided guidelines so that the overall objectives of the <br /> monitoring program were achieved. <br /> The following documents have been used as guidelines for developing these procedures: <br /> • Procedures Manual for Groundwater Monitoring at Solid Waste Disposal <br /> Facilities, Environmental Protection Agency (EPA)-530/SW-611, August 1977 <br /> e Resource Conservation and Recovery Act (RCRA) Groundwater Monitoring <br /> Technical Enforcement Guidance Document, Office of Solid Waste and <br /> Emergency Response (OSWER) 9950.1, September 1986 <br /> o Test Methods for Evaluating Solid Waste: Physical/Chen-&al Methods, EPA <br /> SW-846, 3rd edition, November 1986 <br /> • Methods for Organic Chemical Analysis of Municipal and Industrial Waste <br /> Water, EPA-60014-82-057, July 1982 <br /> • Methods for Organic Chemical Analysis of Water and Wastes, <br /> EPA-600/4-79-020, revised March 1983 <br /> • Leaking Underground Fuel Tank (LUFT) Field Manual, California State Water <br /> Resources Control Board, revised October 1989 <br /> Sample Collection <br /> Sample collection procedures include equipment cleaning, water level and total well depth <br /> measurements, and well purging and sampling. <br /> SACIN:1P70108051080514703AS-971cjb:1 A-1 Emcon <br /> Rev.0,6/6/97 <br />