Laserfiche WebLink
33 Personal Protective Equipment and Action Levels <br /> 33.3 Conditions for Level D <br /> Level D protection wiil be worn for initial entry on-site and initially for all <br /> f activities_ Level D protection would consist of: <br /> �- . Standard Work Clothes <br /> a . Safety boots with steel-toes <br /> ., . Nitrile outer and PVC inner gloves (must be worn during all sampiing <br /> activities) <br /> • Hard hat(must be worn during drilling activities) <br /> L <br /> 33.2 Conditions for Level C <br /> The level of personal protection will be upgraded to Level C if the concentration <br /> of volatile organic compounds which can be detected with a photoionization <br /> detector (PID) in the breathing zone equais or exceeds 1 ppm. <br /> Leve! C protection will consist of: <br /> . 5-minute escape SBA <br /> Full-face air-purifying respirator <br /> • Combination dust/organic vapor cartridges <br /> • Tyvek overall suit <br /> PVC inner and Nitrile outer gloves <br /> R • Safety boots <br /> Hard hat (must be worn during drilling activities) <br /> If the concentration of volatile organics which can be detected with a PID equals <br /> or exceeds 50 ppm, ail field personnei will immediately retreat from the area and <br /> consult the Office Health and Safety Officer. <br /> OSHA Requirements for Personal Protective Equipment - Ali personal protective <br /> equipment used during the course of this field investigation must meet the following <br /> OSHA standards: <br /> Tyne of Protection l3�gutation Source <br /> Eve and Face 29 CFR 1910.133 ANSI Z87.1-1968 <br /> Respiratory 29 CFR 1910.134 ANSI Z38.1-1980 <br /> Head 29 CFR 1910.135 ANSI Z39.1-1969 <br /> Foot 29 CFR 1910.134 ANSI Z41.1-1967 <br /> ANSI = American National Standards Institute <br /> r <br /> 1rn <br /> EM/Sy=01/0042 <br /> .• <br /> 3-2 <br />