ARCHIVED REPORTS XR0001292 - Laserfiche WebLink

Home Browse Search

AT' At'HMEN'T A FIELD AND LABORATORY PROCEDURES Sampling Procedures The sampling procedure for each well consists First of measuring the water level and checking for the presence of separate-phase hydrocarbons (SPH), using either an electronic indicator and a clear TeflonO bailer or an oil-water interface probe Wells not containing SPH that do not have submerged screens are then sampled without purging Wells that have submerged screens are purged or approximately three casing volumes of water (or to dryness) using a centrifugal pump, gas displacement pump, or bailer. Equipment and purging method used for the current sampling event is noted on the attached field data sheets. During purging, temperature, pII, and electrical conductivity arc monitored in order to document that these parameters are stable prior to collecting samples. After purging, water levels arc allowed to partially recover. Groundwater • samples (both purge and no purge) arc collected using a Teflon bailer, placed into appropriate EPA-approved containers, labcled, logged onto chain-or-custody documents, and transported on 'cc to a COlirorni�! State- certified laboratory Laboratory Procedures The groundwater samples were analyzed for the presence of total petroleum hydrocarbons calculated as gasoline, benzene, toluene, ethylbenzene, xylenes, and methyl tertiary butyl ether by EPA Methods 8015 (modified), 8020, and 5030. VOCs and fuel oxygenates were analyzed for by EPA Method 8260. The methods of analysis for the groundwater samples are documented in the certified analytical report. The certified analytical report, chain-of-custody documentation, and field data sheets are presenter) as Attach- ment B.