Laserfiche WebLink
ATTACHMENT A <br /> FIELD AND LABORATORY PROCEDURES <br /> Sampling Procedures <br /> Sampling equipment is thoroughly cleaned prior to use in each well The sampling procedure for each well <br /> consists first of measuring the water level and checking for the presence of separate-phase hydrocarbons(SPH), <br /> using either an electronic indicator and a clear Teflon® bailer or an oil-water interface probe Wells not <br /> containing SPH that do not have submerged screens are then sampled without purging Wells that have <br /> submerged screens are purged of approximately three casing volumes of water (or to dryness) using a <br /> centrifugal pump, gas displacement pump, or bailer The equipment and purging method used for the current <br /> sampling event is noted on the attached field data sheets During purging, temperature, pH, and electrical <br /> conductivity are monitored in order to document that these parameters are stable prior to collecting samples <br /> After purging, water levels are allowed to partially recover Groundwater samples (both purge and no-purge) <br /> are collected using a Teflon® bailer, placed into appropriate EPA-approved containers, labeled, logged onto <br /> chain-of-custody documents,and transported on ice to a California state-certified laboratory <br /> Laboratory Procedures <br /> The groundwater samples are analyzed for the presence of TPHg, benzene, toluene, ethylbenzene, and xylenes <br /> (total) using EPA Methods 8015 (modified) and 8020, and fuel oxygenates and volatile organic compounds <br /> (VOCs) using EPA Method 8260B The methods of analysis for the groundwater samples are documented in <br /> the certified analytical report The certified analytical report, chain-of-custody documentation, and field data <br /> sheets are presented as Attachment B <br /> Purge and Rinsate Water Disposal <br /> Water generated during well sampling and equipment cleaning is pumped into a SECOR truck-mounted water <br /> tank The water is transported to ARCO's holding facility in West Sacramento, California, for temporary <br /> storage Water is then transported by Integrated Waste Management (1WIV1) to Seaport Environmental in <br /> Redwood City,California for disposal <br />