Laserfiche WebLink
Green Full -Density Oxygen Thread Seal Tape <br />Mill -Rose Full -Density Green Thread Seal <br />is over five times heavier than common se, <br />tapes so you can use it and never worry ab <br />contaminating systems. Because it is d <br />greased; it has no residual lubricant, un- <br />like common tapes made with petroleum <br />as a lubricant. Specifically developed for <br />oxygen installations, Green thread seal <br />tape is both safe and reliable to use; it is <br />chemically inert and won't support combustion. <br />Applications: Oxygen lines, systems and <br />other flammable environments. Also may <br />be used on most liquid, oil and chemical <br />installations. <br />Cat # <br />Description <br />Std. Pkg. <br />Master Pkg. <br />Wgt./Pkg. <br />70850 <br />1/2" x 260" Rolls <br />10 <br />100 <br />.40 lbs. <br />70852 <br />3/4" x 260" Rolls <br />6 <br />60 <br />.30 lbs. <br />70854 <br />1 " x 260" Rolls <br />6 <br />60 <br />.50 lbs. <br />DISPLAY PACKAGING - GREEN PTFE THREAD SEAL TAPE <br />Cat # <br />Description Std. Pkg. <br />Master Pkg. <br />Wgt./Pkg. <br />70861 <br />1/2" x 260" 10 Pk. Dispenser 1 <br />10 <br />.60 lbs. <br />70862 <br />3/4" x 260" 6 Pk. Dispenser 1 <br />10 <br />.71 lbs. <br />70863 <br />1" x 260" 6 Pk. Dispenser 1 <br />10 <br />.89 lbs. <br />70865 <br />Wire Rack Display 1 <br />10 <br />.25 lbs. <br />Specifications: <br />Composition: 99.6% PTFE <0.4% pigment <br />Color: Green <br />Oxygen sealant tape is a degreased version <br />Length: 260" (6.6m) <br />of Gas Seal Tape. Meets MilSpec T -27730A <br />Width: 1/2" (12mm), 3/4" (19mm) and 1 " (25mm) <br />(A -A58092) and has the approval of most y <br />Thickness: 0.102mm +/-10% <br />gas companies: AIRCO (USA), British Oxygen <br />Density: 1.5g/cm3 +/-10% <br />Co. (UK), CANOX (Canada), Commonwealth <br />Elongation: >100% <br />Ind. Gases (Aus.) and Air Liquid (France). <br />Pressure rating: Mill -Rose Green Oxygen Tape has been used regularly <br />on oxygen fittings at pressures up to 2,173.9PSI or 15,000kPa. Note: Pressure <br />tin are relative to the quality and torque of the fittings and the amount of tape <br />RECEIVO L u d. <br />pnu <br />mperature range: -450°F to +500°F (-268°C to +260°C) PTFE is completely <br />stable up to +500°F or +260°C. Decomposition is slow up to 750°F or +400°C. <br />AUG 01 2017 <br />Although decomposition will occur on contact with naked flames. <br />Tensile strength: 9-13N/mm2 <br />Wire <br />Rack ENVIRONMENTAL HEALTHeferenceMill-Rose specification sheet for additional uses and applications. <br />'R <br />Display. DEPARTMENT <br />Copper -Filled PTFE Tape for Anti -Seize Thread Sealing <br />Cat # Description Std. Pkg. Master Pkg. Wgt./Pkg. <br />A clean copper based, high -temper <br />anti -seize material for protection <br />corrosion, seizure, galling, rust Carl <br />fusion, galvanic pitting. The cop <br />acts like ball bearings. This tape <br />maintains its elasticity where <br />temperatures reach as high as <br />5001F -direct flame. Meets UL <br />requirements for seal tests. <br />Applications: Bolts, studs, threaded <br />fittings and couplings, valve shafts, cylinder heads, manifolds and any <br />other connection in a hostile environ- <br />ment (boilers, ovens, exhaust manifolds, <br />hot water storage tanks, pumps, burner <br />assemblies, turbo charger fittings, etc.) <br />Do not use on oxygen systems. <br />70800 1/2" x 120" Rolls 10 100 .22 lbs. <br />70811 1/2" x 600" Rolls 10 100 1.14 lbs. <br />70805 3/4" x 120" Rolls 6 60 .44 lbs. <br />Specifications: <br />Composition: 90% PTFE/ 10% Copper <br />Color: Copper <br />Length: 600" (15.1m) <br />Width: 1/2" (12mm), 3/4" (19mm) <br />Thickness: 0.0045" +/-10% (0.115mm +/-100/6) <br />Density: 1.5g/cm3 +/-10% <br />Elongation: >100% <br />Temperature range: The tape is completely thermally stable at temperatures <br />between -450°F to +500°F (-268°C to +260°C) PTFE in the tape will slowly <br />decompose up to 750°F or 400°C. Decomposition will occur on contact with naked <br />flames. Upon decomposition, the remaining copper powder will assist disassem- <br />bly. The copper flake will melt at 1981 OF or 1083°C <br />Tensile strength: 9-13WMM2 <br />Reference Mill -Rose specification sheet for additional uses and applications. <br />The Mill -Rose Co. • Clean -Fit Products • 7310 Corporate Blvd. • Mentor. OH 44060 <br />