Laserfiche WebLink
B) Gluing F -Series Electrical to Sump Wall <br />13.1) For F-1 X -RR fitting models and your PVC -Coated ROBROYTm Brand Conduit, or your F-1 X - <br />SS fitting models and galvanized condit should be clean and COMPLETELY DRY AT ALL TIMES. <br />All pre -abraded or milled areas should be inspected for debris and inconsistencies. No dirt, grit, <br />water or other foreign material should be on or inside the fiberglass fitting components. <br />USE SMITHTM ADHESIVE # 7069 or 8069 <br />or AMERONTM PSX-20 8oz ONLY <br />B.2) Get one clamping tool ready for each <br />/ Adhesive <br />fitting installation. Fig. B4 <br />B.3) Follow your adhesive <br />manufacturer Instructions to mix and <br />apply your adhesive. One bag of provided <br />fiberglass filler is to be fully mixed with each <br />adhesive kit. (Pg. 4) <br />DO NOT ATTEMPT TO MIX MORE <br />THAN ONE KIT AT A TIME. <br />B.4) Main body first - carefully apply a <br />generous amount of adhesive to the wall and the <br />face that will meet the wall (Fig. 134). <br />GENEROUSLY APPLY ADHESIVE TO THE <br />FACE OF THE FLANGE AND THE <br />CHANNEL ON THE INSIDE <br />Generously <br />adhesive to he mixed <br />flange <br />A <br />runoq <br />JI` <br />JUN 0 8 2017 <br />',-â–ºJiVMENTAL HEALTH <br />DEPARTMENT J <br />OUTSIDE <br />ii -F -Series -1 X -SS -11 A <br />