COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

Tanknology Executive Summary Response to Comments Received March 2019 1. Comment Tank 1: Are the Tanks Grounded And/Or Bonded Properly? - Ground tanks per NFPA 780 or other accepted industry standard. Response:Grounding provided (Photo 1). 2. Comment: Tank 1: Emergency Contact Numbers Posted as Required? - Emergency plan is required and should include postingof emergency contact numbers. Response:Emergency contact numbers have been posted (Photo 2 & 3). 3. Comment: Tank 1: Filling Procedures Posted at Fill as Required? - Install signage at the fill point to document filling procedures. Response:Filling procedures have been posted (Photo 4). 4. Comment: Tank 1: Fire Valve Installed? - Install afire valve on product transfer piping through which liquid could flow through gravity. Response:Fire valve has been installed on product transfer piping(Photo 5). 5. Comment Tank 1: NFPA Signage - Faded. Resaonse.'Updated NFPA signage installed as required (Photo 6 & 7). 6. Comment Tank 1: Normal Vent Properly Sized?- Per NFPA 30 2015 2 1.4.3.3 Normal vents shall be sized in accordance with either API Standard 2000,Venting Atmospheric and Low-Pressure Storage Tanks, or another approved standard. Alternatively, the normal vent shall be at least as large as the largest filling or withdrawal connection, but in no case shall it be Iessthan I? in. (3.2 cm) nominal inside diameter. Resaonse: Normal vent reduces to 2-inch diameter which matches size of fill and discharge piping (previous correspondence with CUPA inspector addressed this question). Fire inspector had no comment on this configuration. See Attachment 1. 7. Comment Tank 1: Stairways - Handrails - Platforms - ladders - Damage Response:Noted. Ladder not used for daily use of tank. Repair will be coordinated at future date. 7\PR JECTS\Allled Waste\Fbm d\SPCC Phn 2019\Text\RC\FomaM LE_Tankwlogy RTC d=