Laserfiche WebLink
FIBERGLASS -COMPOSITE PIPE GROUP <br />Fittings Dimensions in <br />2 through 6 -inch Sizes <br />-"' for Dualoy 3000/L piping systems <br />Units <br />All dimensions are in U.S. Customary units (inches). <br />Diametric dimensions are maximums. <br />Insertion depths (X1, X2) are typical. <br />All weights (lb) are approximate. <br />Tolerances <br />Tolerance for centerline -to -face dimensions on fittings with bell -end <br />configuration is ±'/s inch. <br />Listings <br />Dualoy 3000/L is Listed in the U.S. with Underwriters Laboratories for nonmetallic <br />underground piping for motor vehicle (MV), high blend (HB), concentrated (CT) and <br />Underwriters pp <br />aviation and marine (A&M) fuels (File MH9162). Dualoy 3000/L pipe and fittings are <br />also listed with Underwriters Laboratories of Canada (File CMH 715). In Great Britain <br />U L Laboratories Inc, U LI✓r <br />the Dualoy 3000/L system has been tested and accepted by the London Fire and <br />Civil Defence Authority. Dualoy 3000/L has been issued a Certificate of Compliance <br />to the Institute of Petroleum (IP) Specification by ERA Technology, Ltd. <br />End configurations <br />Bell end is standard. <br />Taper angle <br />The taper angle on all bell and spigot end configurations is 13/a . <br />Pressure ratings <br />See Ameron publication DUALoy 3000/L FIBERGLASS PIPE AND FITTINGS, FP265, for <br />pressure ratings. <br />Individual system components may not have the same ratings as the pipe. Refer <br />to the detailed product information for the specific components to determine the <br />pressure rating for the system as a whole. <br />Manufacturing methods The fiberglass -reinforced epoxy resin fittings shown in this document are <br />manufactured by filament winding or compression molding. <br />Adapters: bell x NPT female <br />Adapters: bell x NPT male <br />Adapters: isolation <br />Adapters: spigot x NPT female <br />Adapters: spigot x NPT male <br />45° Elbows <br />90° Elbows <br />End caps <br />Flange rings <br />Flange stub ends <br />Nipples <br />Reducer bushings <br />Repair couplings <br />Sleeve couplings <br />Sump penetration pieces <br />Tees <br />FP266E (11/07) <br />