Laserfiche WebLink
WESTEFUN FIBERGLASS, �iC. 1-800-638-3375 <br />DISPENS'R MOUNTING ASSE1�113LY <br />sunni=y <br />The Dispenser Mounting Assembly Containment System is installed in conjunction with the product <br />dispenser and in accordance with the manufacturer's installation instructions. The Dispenser <br />Mounting/Containment System shall contain environmentally hazardous fluids that might leak from any <br />piping terminations, fittings, and flex -hoses contained within the Dispenser Mounting/Containment <br />Assembly, shall insure, using U.L. Listed mounting systems for both dispenser base and safety valves, that <br />safety valve poppet activation occurs in the event of dispenser knock -down without damage to either <br />mount frame system and shall be manufactured by Western Fiberglass, Inc. <br />System Specification <br />1.01 System Suitability , <br />The Dispenser Mounting Containment System shall: <br />A. Provide secure, independent, U.L. Listed mounting assemblies for both the dispenser base <br />and shear valve that shall be anchored in concrete for transfer of stress and loading_ Such <br />that shearing action occurs at the shear valve upon dispense4r impact without damage to the <br />mounting frameworks. <br />B. Provide a means to prevent surface, ground, run-off or wash --down water from entering the <br />containment system <br />C. Contain any release of environmental contaminants from the dispenser and/or fittings <br />contained within the Dispenser Nfounting/Containment System. <br />D. Provide full access to all piping termination's, fittings and hoses contained within the <br />Dispenser Mounting/Commnment System - <br />E. Accommodate an explosion/flame suppressant barrier to prevent flash fire. <br />F. Be available U.L. Listed in FRP construction. <br />1.02 Construction Specifications: <br />A. Meet or exceed United States National Bureau of Standards PS -15-69 for Custom contact- <br />tiiolded Reinforced-Polvester Chemical -Resistant Process Equipment or U.L. Listing if <br />applicable. <br />B. Be constructed of materials that are not harmful to the environment. <br />C. Be suitable for petroleum products and blends including methanol and ethyl alcohol <br />mixtures. <br />D. Have a thirty (30) year warranty against corrosion. <br />1.03 Release Monitoring shall: <br />A. Allow full visual inspe=on of all piping reductions, fittings, and hoses. <br />1.4 Piping Penetrations shall: <br />A- Provide locations for the installation of fluid tight pipe and conduit penetration seals to be <br />installed according to manufacturer's instruction <br />35 <br />