Laserfiche WebLink
sulfide (1-12S). Do not attempt rescue without supplied-air respiratory protection. <br /> SECTION 3 COMPOSITION/INFORMATION ON INGREDIENTS <br /> COMPONENTS CAS NUMBER AMOUNT <br /> Highly refined mineral oil (CIS- C50) Mixture 70-99 %weight <br /> SECTION 4 FIRST AID MEASURES <br /> Description of first aid measures <br /> Eye: No specific first aid measures are required. As a precaution, remove contact lenses, if worn, and <br /> flush eyes with water. <br /> Skin: Nospecific first aid measures are required. As a precaution, remove clothing and shoes if <br /> contaminated. To remove the material from skin, use soap and water. Discard contaminated clothing and <br /> shoes or thoroughly clean before reuse. <br /> Ingestion: No specific first aid measures are required. Do not induce vomiting. As a precaution, get <br /> medical advice. <br /> Inhalation: No specific first aid measures are required. if exposed to excessive levels of material in the air, <br /> move the exposed person to fresh air. Get medical attention if coughing or respiratory discomfort occurs. <br /> If exposure to hydrogen sulfide(H2S) gas is possible during an emergency, wear an approved, positive <br /> pressure air-supplying respirator. Move the exposed person to fresh air. If not breathing, give artificial <br /> respiration. If breathing is difficult, give oxygen. Get immediate medical attention. <br /> Most important symptoms and effects, both acute and delayed <br /> IMMEDIATE HEALTH EFFECTS <br /> Eye: Not expected to cause prolonged or significant eye irritation. <br /> Skin: Contact with the skin is not expected to cause prolonged or significant irritation. Contact with the skin <br /> isnot expected to cause an allergic skin response. Not expected to be harmful to internal organs if <br /> absorbed through the skin. <br /> Ingestion: Not expected to be harmful if swallowed. <br /> Inhalation: Not expected to be harmful if inhaled. Contains a peVoleum-based mineral oil. -May cause <br /> respiratory irritation or other pulmonary effects following prolonged or repeated inhalation of oil mist at <br /> airborne levels above the recommended mineral oil mist exposure limit. Symptoms of respiratory irritation <br /> may include coughing and difficulty breathing. Hydrogen sulfide has a strong rotten-egg odor. However, <br /> with continued exposure and at high levels, H2S may deaden a person's sense of smell. if the rotten egg <br /> odor is no longer noticeable, it may not necessarily mean that exposure has stopped. At low levels, <br /> hydrogen sulfide causes irritation of the eyes, nose, and throat. Moderate levels can cause headache, <br /> dizziness, nausea, and vomiting, as well as coughing and difficulty breathing. Higher levels can cause <br /> shock, convulsions, coma, and death. After a serious exposure, symptoms usually begin immediately. <br /> Revision Number; 6 2 of 9 Delo Syn-Gear Ho SAE 75W-913 <br /> S17S: 35588 <br /> Revision Date: March 23,21318 <br />