Laserfiche WebLink
Hilmar California. Sherwood Labs supplies the sample vials with <br /> the proper amount of Hydrochloric Acid in each bottle, so no <br /> a further acid or any other chemical should be added to the water. <br /> The vials will be placed on ice in a cooler and kept on ice until <br /> delivered to the lab or turned over to their courier within 48 <br /> hours of the sampling time. <br /> Purged water will be placed in a sealed drum and left at the <br />► site. <br /> Water samples will be taken from the water at or near the surface <br /> of the water table, unless otherwise indicated. The containers <br /> will be filled so that zero headspace is present in the sealed <br /> vial before placing in the cooler. Trip blanks will accompany <br /> i all sample containers . A Chain of Custody will be filled out by <br /> the sampler. The tests run will be as follows : <br /> Test Detection <br /> Limits <br /> DHS TPH Method (gasoline) 500 ug/L <br />► EPA 602 for <br /> Benzene 0. 5 ug/L <br /> Toluene 0 . 5 ug/L <br /> EthylBenzene 0 . 5 ug/L <br /> Xylenes 0.5 ug/L <br />► All laboratory results , well measurements and the Chain of <br /> Custody must be sent to our office for evaluation and the <br /> preparation of the quarterly report. <br /> i <br />► <br />► <br /> i <br />