Laserfiche WebLink
FCEIVED <br /> SWRCB,January 2002 JUN 19 2014 Page of <br /> 9. FILL RISER CONTAINMENT SUMP <br /> Facility is Not Equipped With Fill Riser Containment Sumps L <br /> Fill Riser Containment Sumps are Present,but were Not Tested <br /> Test Method Developed By: ❑Sump Manufacturer E Industry Standard X Professional Engineer <br /> L Other(Spec) <br /> Test Method Used: ❑Pressure Vacuum X Hydrostatic <br /> Li Other(Specify) <br /> Test Equipment Used: Caldwell Level Change Indicator Equipment Resolution: .002 <br /> Fill Sump# 1-87-M Fill Sump#2-87-5 Fill Sump#3-91 Fill Sump# <br /> Sump Diameter: 42" 42" 42" <br /> Sump Depth: 46" 53" 48" <br /> Height from Tank Top to Top of 22" 23" 22" <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest 20" 24" 20" <br /> Electrical Penetration: <br /> Condition of sump prior to Dry Dry Dry <br /> testing: <br /> Portion of Sump Tested Water Level 24 %2" Water Level 26" Water Level 24" <br /> Sump Material: Fiberglass Fiberglass Fiberglass <br /> Wait time between applying 5 Minutes 5 Minutes 5 Minutes <br /> water and starting test: <br /> Test Start Time: 8:35 9:25 10:25 <br /> Initial Reading(111): .001 .001 .001 <br /> Test End Time: 9:05 9:55 10:55 <br /> Final Reading(RF): .001 .001 .001 <br /> Test Duration: 30 Minutes 30 Minutes 30 Minutes <br /> Change in Reading(RF-R,): 0 0 0 <br /> Pass/Fail Threshold or Criteria: .005/30 Minutes .005/30 Minutes .005/30 Minutes <br /> Test Result: Pass Pass Pass <br /> Is there a sensor in the sump? Yes Yes Yes <br /> Does the sensor alarm when <br /> either product or water is Yes Yes Yes <br /> detected? <br /> Was sensor removed for testing? Yes Yes Yes <br /> Was sensor properly replaced and Yes Yes Yes <br /> verified functional after testin ? <br /> Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />