Laserfiche WebLink
12 <br />SHELVING [REMOVAL & ADJUSTMENT] / PRODUCT STOPS / THERMOM. <br />1. Shelving Bracket Removal & Adjustment <br /> <br />Adjusting Shelves <br /> <br />1. Lift Shelf Brackets Upward <br />2. Rotate Shelf Upward or Downward <br />3. Return Shelf Brackets To Upright At Notch <br /> Desired (To Achieve Desired Angle) <br /> <br />Removing Shelves <br /> <br />1. Unplug LED light fixture <br />2. Lift Shelf Brackets Upward <br />3. Remove From Uprights <br />Return Shelves To Uprights In Reverse Order They Were <br />Removed. <br /> <br />Note: Illustrations shown with end panel removed for <br />illustrative purposes only. <br />Shelf Brackets <br />Product Stops <br />(Typical) <br />2. Product Stops <br /> <br />Product stops are designed to keep product at front of <br />case for easy viewing and access. <br />Product stops are able to be removed for cleaning. <br />See CLEANING SCHEDULE - TO BE PERFORMED <br />BY STORE PERSONNEL section in this manual for <br />specifics. <br /> <br />3. Thermometer <br /> <br />Thermometer is attached to front of shelf (may vary). <br />Illustration below shows thermometer on lowest shelf. <br />Thermometer may be moved from shelf to shelf. <br /> <br /> <br />Upright With Slots <br />For Bracket <br />Thermometer [May <br />Be Attached To Any <br />Shelf on Case] <br />Bracket