Laserfiche WebLink
Document 1.12 Implementation Date 4/22/19 Revision 0 <br /> Revision Date NA <br /> 6. Immediately notify the proper authorities listed in the Slug Discharge Control Plan Notificaiton <br /> Procedure posted on the office door. <br /> 7. Utilize the spill kit materials to absorb remaining material <br /> 8. Dispose of the used absorbent in the spill kit container lined with 2x contractors bag <br /> 9. Use the water hose to dilute the residual with a small amount of water <br /> 10. Utilize soda ash to neutralize the wetted area <br /> 11. Soak up remining spill with the spill kit <br /> 12. Sweep up and dispose of any remaining debris in the spill kit container <br /> Hydrogen Peroxide 35% <br /> 1. Evacuate personnel in the immediate if odor is strong. <br /> 2. Utilize the air blower located in the conex to ventilate the area <br /> 3. Utilize Personal Protective Equipment: <br /> a. Rubber gloves <br /> b. Glasses <br /> c. splash shield <br /> d. rubber apron <br /> e. NIOSH Full Face respirator for Organic Vapor/Acid Gas <br /> 4. Utilize sand to berm spill <br /> 5. Do not allow spill to reach the storm drains, utilize the following steps: <br /> a. The source of the spill will be immediately addressed to avoid further spill <br /> b. The spill will then be contained to eliminate any more liquid leaving the sewer drain <br /> system, unless the spill is traveling to the storm drains. <br /> c. Secure the storm drain with a barrier device, such as, absorbent poured to create a <br /> dam, spill absorbent rolls, or rubber spill dams located in the spill kit near the chemical <br /> storage area in the warehouse <br /> d. Contain the spill with any of the above barrier devices to avoid any more liquid leaving <br /> the sewer drain system <br /> e. Isolate the liquid that has left the site with barrier devices or dirt berms and utilize the <br /> following steps for clean up. <br /> 6. Notify Management if the solution has entered the storm drain system <br /> 7. Immediately notify the proper authorities listed in the Slug Discharge Control Plan Notification <br /> Procedure posted on the office door <br /> 8. Utilize the spill kit materials to absorb remaining material <br /> 9. Dispose of the used absorbent in the spill kit container lined with 2x contractors' bag <br /> 10. Use the water hose to dilute the residual with a small amount of water <br /> 11. Utilize soda ash to neutralize the wetted area <br /> 12. Soak up remining spill with the spill kit <br /> 13. Sweep up and dispose of any remaining debris in the spill kit container <br /> Page 4 of 6 <br />