Laserfiche WebLink
RFSNA Industries Inc <br /> Quality Assurance/Quality Control Plan <br /> Revised November 199' <br /> ' Provided the database is of sufficient size, statistical techniques may be employed for data <br /> validation. <br /> 1 <br /> 9.0 GROUNDWATER MONITORING PROTOCOL <br /> ' Monitoring of depth to water and free product thickness within wells at the site will be <br /> conducted using an Interface Probe or Conductivity Meter For consistency,-all measurements <br /> will be taken from the north side of the wellhead at the survey mark. To assess potential <br /> infiltration of fine-grained sediments, total well depth will also be sounded. <br /> Product thickness Is calculated by subtracting the depth to product from the depth to water. In <br /> ' addition, water elevations are adjusted for the presence of fuel with the following calculation: <br /> (Product Thickness) (.8) + (Water Elevation) = Corrected Water Elevation <br /> NOTE The factor of 0 S accounts for the density difference between water and petroleum <br /> ' hydrocarbons <br /> ' Newly installed wells will be allowed to stabilize for 24 hours after development prior to free <br /> product inspection. <br /> ' An acrylic Surface Sampler will be used for <br /> ry p visual inspection of the groundwater in order to note <br /> ' sheens (difficult to detect with the Interface Probe), odors, microbial action and sediments The <br /> sampler Is calibrated in inches and centimeters for visual inspection of product thickness. <br /> QAQC10n WL 7 <br />