COMPLIANCE INFO 2009 - 2013 - Laserfiche WebLink

Home Browse Search

Conditions for N-714-1-4 (continued) Page 3 of 4 1.I_ If Franklin Fueling Systems (F'FS)PV-Zero pressure/Vacuum vent valve is installed,the permittee shall conduct the following maintenance for the pressure vacuum vent valve, at least once every 12 months: 1) visually inspect the housing,pipe fittings, and rain cap for obvious signs of damage,missing pafts,or fluid leaks,2)visually inspect the rain Cap,from ground level, for signs of bird nests or insect activity, and 3) ain and inspect the fill fluid per the "Fluid Inspection Procedure" described in the Executive Order specified in this permit. [District Rulc 4621] 15. Periodic maintenance inspections of the Phase II vapor recovery system shat include, at a minimum,verification that 1)the fueling instructions required by this permit are clearly displayed with the appropriate toll-free complaint phone number and tonic warning signs;2)the following nozzle components are in Place and in good condition as specified in ARl3 Executive Order as applicable; faceplate/facecorte, bellows,latching device spring, vapor check valve, spout (proper diameterlvapor collection holes),insertion interlock mechanism,automatic shut-off mechanism, and hold open latch(unless prohibited by law or the local fire control authority); 3)the hoses are not torn, flattened or crimped;4)the vapor path of the coaxial hoses associated with bellows equipped nozzles dos not contain more than 100 ml of liquid if applicable; and 5)the vapor processing unit is functioning properly,for operations that are required to have or Possess such a unit. [District Rule 46221 16. .In the event of a separation due to a drive off, the permittee shall,unless otheiwise specified in the applicable ARB Executive Order,conduct a visual inspection of the affected equipmew and rt place the affected nozzles,coaxial hoses, breakaway couplings, and any other damaged components with new or cortifid rebuilt components that are ARL certified. The activities shall be documented in accordance with the requirem nts of this peinnit before placing the affected equipment back in service. [District Rule 4622.] 17_ The gasoline throughput for this permit unit shall not exceed 7,884,000 gallons in any one calendar year, [District Rule 2201] 18. The permittee shall conduct all periodic vapor recovery system performance tests specified in this permit,no more than 30 days before or after the required compliance testing date, unless otherwiserequired under the applicable ARL Executive Order. [District Rules 4621 and 4622] 19. The permittee shall perform and pass a Static Torque of Rotatable Phase I Adaptors test using ARB procedure TP- 201.IB within 60 days after initial start-up and at least once every 36 months t ercafter. [District Rule 462 1] 20. The permittee shall perform and pass a Pressure Integrity of Drop Tube Drain 1Valve Assembly Test using ARB TP- 201.1C or a Pressure Integrity of Drop Tube Overfill Protection Devices Test tising ARB TP-201.ID if an overfill protection device is installed, within 60 days after initial start-up and at least once every 36 months thereafter. [District Rulc 4621] 21. The permittee shall perform and pass a Static Leak Test for Underground Tanks using ARB TP-201.3 in accordance with the Executive Order specified in this permit for the Phase 11 Vapor Recov ry System within 60 days after initial start-up and at least once every 12 months thereafter, [,District Rules 4621 and 622] 22. The permittee shall perform and pass a Dynamic Back Pressure'fest using A TP-201.4 within 60 days after initial start-up and at least once every 12 months thereafter. [District Rule 4622] 23. The permittee shall perform and pass a Liquid Removal Test using the test procedure defined in the Executive Order specified in this pen-nit for the Phase II Vapor Recovery System within 60 days after initial startup and at least once every 12 months thereafter. [District Rule 46221 24. The permittee shall perform and pass a Nozzle Bag Test using the test procedum defined in the Executivc Order specified in this permit for the Phase II Vapor Recovery System within 60 days after initial startup_ [District Rule 4622] 25. The permittee shall perform and pass a Vapor Pressure Sensor Verification Tes using the test procedure defined in the Executive Ordcr specified in this permit for the Phase II Vapor Recovery Syste within 60 days after initial startup and at least once every 12 months thereafter. [.District Rule 46221 26. The permittee shall perform and pass a Vapor Polisher Operability Test using t I test procedure defined in the Executive Order specified in this permit for the Phase 11 Vapor.Recovery Systc within 60 days after initial startup and at least once every 12 months thereafter. [District Rule 46221 CONDITIONS CONTINUE ON NEXT PAG Na�4i�. ut6[Oii 3.o9aM�(YYEftW