COMPLIANCE INFO PRE 2019 - Laserfiche WebLink

Home Browse Search

Page 3 of 8 For further information and a review of various studies, go to www.osha.gov/SLTC/ formaldehyde; www.iarc.fr and other authoritative websites. May cause allergic skin reaction. Some reports suggest that formaldehyde may cause respiratory sensitization, such as asthma, and that preexisting respiratory and skin disorders may be aggravated by exposure. 4. First Aid Measures INGESTION: If accidentally swallowed, dilute by drinking large quantities of water. If the individual is drowsy or unconscious, do not give anything by mouth, Immediately contact poison control center or hospital emergency room for advice on whether to induce vomiting or for any other additional treatment directions. INHALATION: If inhaled, remove to fresh air. if not breathing give artificial respiration, preferably mouth-to-mouth. if breathing is difficult, give oxygen. Get medical attention immediately. SKIN: immediately remove all contaminated clothing, including shoes. Wash the affected area of the body with soap or mild detergent and large quantities of water for at least 20 minutes. Contact a physician if irritation persists. if there are chemical burns, cover the area with sterile, dry dressings and get medical attention immediately. EYES: Immediately flush eyes with plenty of water for at least 15 minutes. Eyelids should be held apart during irrigation to ensure water contact with entire surface of eyes and lids. Get medical attention immediately. 5. Fire Fighting Measures Flash point 61.1 °C (142.0 °F) Seta flash Closed Cup ASTM D 3828 Lower explosion limit Approx. 7 % (V) Upper explosion limit Approx. 70 % (V) Auto ignition Approx. 420 °C (788 °F) COMBUSTIBLE LIQUID. Keep away from heat and flame. in case of fire, use water spray, dry chemical, "alcohol" foam or CO2. Use water to keep fire exposed containers cool. Wear full emergency protective equipment including NIOSH approved pressure demand self-contained breathing apparatus. 6. Accidental Release Measures Always wear appropriate protective equipment. Eliminate all ignition sources and ventilate the area to reduce the potential for exposure, fire and explosion. Recover and reuse as much liquid as possible. Large quantities: Enclose with diking material to prevent seepage into sewer systems, surface/ground water or natural bodies of water. If possible neutralize with dilute(<5%) solutions of ammonium hydroxide, sodium hydroxide, sodium bisulfite or sodium sulfite. Small quantities: Soak up with absorbent material (vermiculite, dry sand, earth) and remove to a chemical disposal area. Follow all emergency notification and reporting regulations. 7. Handling and Storage 7.1 Handling 3 MSDS For Parasite-S by Western Chemical,Inc.