COMPLIANCE INFO 2010 - 2012 - Laserfiche WebLink

Home Browse Search

Materials OPW 10 Series Top: Cast iron Low Profile Patented Thermal I Emergency Shut-Off Body: Cast iron Relief Valve Valves Disc: M-19 Main //Air Test Port OPW 10 Series Emergency Shut-off Carrier:Zinc-plated steel Poppet Secondary Stem: Copper-nickel-chrome- Seat y Poppet Valves are installed on fuel supply lines plated brass ,Fusible beneath dispensers at grade level to Poppet spring: Stainless steel Link minimize hazards associated with collision Seal: M-19 0-Ring Nickel-Plated, or fire at the dispenser. If the dispenser Packing nut: Brass,Teflon"-coated Teflon-coated ; Inlet and outlet thread: 1'h"(4 cm) Main Stem is pulled over or dislodged by collision, NPT(British threads available) the top of the valve breaks off at the *With black Duragard°E-Coating Bbitwn Main Poppetody integral shear groove, activating poppets ....-_...... ...... _ _ __........ and shutting off the flow of fuel. Single- Features poppet models shut off supply flow, while ♦ High Flow Capacity—the primary ♦ Integral Test Port—a'/8' (9.5 mm)test double-poppet models shut off supply as poppet is held out of the flow stream port allows the piping system to be while the secondary poppet is held air-tested without breaking any piping well as prevent release of fuel from the normally open to minimize head loss connections. dispenser's internal piping.The base of across the valve and to protect the ♦ Patented Thermal Relief Valve— the emergency valve is securely anchored poppet seals from damage and erosion. relieves excessive pressure over 25 psi True 11/2"(4 cm)and 2"(5 cm) body caused by thermal expansion of fuel to the concrete dispenser island through sizes ensure maximum flow. in the dispenser piping system in the a stabilizer bar system within the dispenser ♦ Fire Protection—a fusible link trips the event of fire(double-poppet models only). sump or pan to ensure proper shearing valve closed at 165°F to shut off fuel ♦ Low-Profile Tops—female and action.The valve base is secured to the supply to the dispenser. union-top double-poppet valves have ♦ Main Poppet Seat Integral to the Top a low-profile top to allow upgrading stabilizer bar using a three-point boss Assembly—having the main poppet from OPW single-poppet valves without mount system or a U-Bolt Kit (not seat as an integral part of the valve top changing existing piping. included) 1OUBK-015 (1-1/2") and ensures a new, clean seating surface is ♦ Multiple Mounting Options—valves installed each time the to is replaced. 10URK-0200(2 sold separately). Valve P� P are boss-mounted to stabilizer bars in This design also ensures that the sumps and pans or mounted to bars inlet(bottom)connections are female integrity of the seal between the valve embedded in the island with optional pipe threads and outlet(top)connections top and bottom is verified during line U-Bolt kits 1OUBK-015 (not included). testing and allows full inspection of the Versatile Combination Body(boss are available with female threads, male main poppet when the top is removed. mount/U-Bolt mount) models are threads or a union fitting. Other options ♦ Duragard®-Coat Finish—provides available to accommodate most mounting include suction system models with a superior corrosion resistance. applications with one valve style. normally closed secondary poppet which ♦ Reliable Shut-off—a stainless steel ♦ Underwriters Laboratories— U� main spring, a teflon-coated brass listed for use with gasoline and maintains prime,and models with external packing nut and a copper/nickel/ 85% and 100% methanol.All OPW threads on the inlet body which connect chrome-plated brass stem are designed 10 Emergency Shut-Off Valves meet to secondary containment systems. to prevent tar build-up and corrosion requirements of UL STANDARD 842. from interfering with poppet operation ♦ Compatible with 85%ethanol (E85) after long periods of normal service without activation. PA15 Offset Adaptor The OPW PA15 Offset Adaptor is designed for adjusting misalignment of pipe in dispenser sumps and suction stubs. The PA15 has a low profile feature,and is designed for maximum flow. Ordering Specifications Thread Size Offset Height Width Materials Part Number in. cm in. cm in. cm in. cm Ductile Iron PA15-10 11h 38.1 1 25 21b 57.2 31h 92.1 Zinc Chromate 0 P Wim' PA15-15 11h 38.1 11h 38.1 21b 57.2 416 104.8 aUQVER COMPANY PA15-20 11h 38.1 2 51 211. 57.2 41h 117.5 a