COMPLIANCE INFO 2010 - 2012 - Laserfiche WebLink

Home Browse Search

Materials OPW 10 Series Top: Cast iron Low Profile" Patented Thermal Emergency Shut-Off Body:Cast iron Relief valve Valves Disc:M-19 Air Test Port Main OPW 10 Series Emergency Shut-off Carrier:Zinc-plated steel Poppet Secondary Stem: Copper-nickel-chrome- Seat j Poppet Valves are installed on fuel supply lines plated brass /Fusible beneath dispensers at grade level to Poppet spring: Stainless steel Link minimize hazards associated with collision Seal: M-19 0-Ring Nickel-Plated, or fire at the dispenser. If the dispenser Packing nut: Brass,Teflon®-coatedTeflon-coated Inlet and outlet thread: 1'h"(4 cm) Main Stem is pulled over or dislodged by collision, NPT(British threads available) the top of the valve breaks off at the ard®E-Coating`With black Dura Combination Main Poppet 9 9 Bey ( integral shear groove, activating poppets —4 I and shutting off the flow of fuel. Single- Features poppet models shut off supply flow,while • High Flow Capacity—the primary ♦ Integral Test Port—a W (9.5 mm)test double-poppet models shut off supply as poppet is held out of the flow stream port allows the piping system to be while the secondary poppet is held air-tested without breaking any piping well as prevent release of fuel from the normally open to minimize head loss connections. dispenser's internal piping.The base of across the valve and to protect the + Patented Thermal Relief Valve— the emergency valve is securely anchored poppet seals from damage and erosion. relieves excessive pressure over 25 psi True 1'h° 4 cm " 5 cm to the concrete dispenser island through )and 2 ( ) body Y caused by thermal expansion of fuel sizes ensure maximum flow. in the dispenser piping system in the a stabilizer bar system within the dispenser ♦ Fire Protection—a fusible link trips the event of fire(double-poppet models only). sump or pan to ensure proper shearing valve closed at 165°F to shut off fuel Low-Profile Tops—female and action.The valve base is secured to the supply to the dispenser. union-top double-poppet valves have P Main Poppet Seat Integral to the Top a low-profile top to allow upgrading stabilizer bar using a three-point boss Assembly—having the main poppet from OPW single-poppet valves without mount system or a U-Bolt Kit(not seat as an integral part of the valve top changing existing piping. included) 1 OUBK-015 (1-1/2") and ensures a new, clean seating surface is ♦ Multiple Mounting Options—valves aratel2 sold se installed each time the top is replaced. are boss-mounted to stabilizer bars in 10URK-0200( separately). Valve This design also ensures that thesumps and pans or mounted to bars i inlet(bottom)connections are female integrity of the seal between the valve embedded in the island with optional pipe threads and outlet(top)connections top and bottom is verified during line U-Bolt kits 1OUBK-015 (not included). testing and allows full inspection of the Versatile Combination Body(boss are available with female threads, male main poppet when the top is removed. mount/U-Bolt mount) models are threads or a union fitting. Other options • Duragard®-Coat Finish—provides available to accommodate most mounting include suction system models with a superior corrosion resistance. applications with one valve style. normally closed secondary poppet which ® Reliable Shut-off—a stainless steel ♦ Underwriters Laboratories— �l maintains prime,and models with external main spring, a teflon-coated brass listed for use with gasoline and packing nut and a copper/nickel/ 85% and 100% methanol.All OPW threads on the inlet body which connect chrome-plated brass stem are designed 10 Emergency Shut-Off Valves meet to secondary containment systems. to prevent tar build-up and corrosion requirements of UL STANDARD 842. from interfering with poppet operation Compatible with 85%ethanol (E85) after long periods of normal service without activation. PA15 Offset Adaptor4 The OPW PA15 Offset Adaptor is designed for adjusting . )� misalignment of pipe in dispenser sumps and suction stubs. The PA15 has a low profile feature,and is designed for =. maximum flow.:` Ordering Specifications _. Thread Size Offset Height Width Materials Part Number in. cm in. cm in. cm in. cm Ductile Iron _ PA15.10 11h 38.1 1 25 21h 57.2 3% 92.1 Zinc Chromate 0 P W PA15-15 11h 38.1 1'h 38.1 211, 57.2 41h 104.8 A p(tltER tnrmnnr PA15.20 11h 38.1 2 51 211. 57.2 41h 117.5