Laserfiche WebLink
AST SP001 ANNUAL INSPECTION Received on 10/29/2019 <br /> SJC EHD - CR <br /> Item Task Status <br /> 3.0 Cathodic Protection <br /> 3.1 Galvanic cathodic Confirm system is functional, includes the wire connections for r-Yes r-No rN/A <br /> protection s stem galvanic systems. <br /> 3.2 Impressed current a. Inspect the operational components(power switch, meters, and rYes rNo ISNIA <br /> system alarms . <br /> b. Record hour meter, ammeter and voltmeter readings. r-Yes r-No rN/A <br /> c. Rectifier Unit: Make:,Model: <br /> Comments: <br /> 4.0 Tank Shell, Heads, Roof <br /> 4.1 Coating Is the coating in good condition? r-Yes rNo rN/A <br /> 4.2 Steel condition Is structure free of: <br /> • Dents FYes rNo rN/A <br /> • Buckling rYes rNo r-N/A <br /> • Bulging rYes r-No rN/A <br /> • Corrosion rYes r-No rN/A <br /> • Cracking rYes rNo rN/A <br /> 4.3 Roof slope System is free of low points and standing water. r Yes r No r N/A <br /> Comments: <br /> Tank has paint failure, Recommend cleaning and painting. <br /> 5.0 Tank Equipment <br /> 5.1 Vents- Primary Components are moving freely and vent passageways are not <br /> obstructed for: r Yes r No r N/A <br /> • Emergency vent covers: Make: ,Model:, Diameter: r-Yes r-No rN/A <br /> • Normal Vent: Make: ,Model:, Diameter: <br /> • Other moving vent components(enter manufacturer and model r-Yes r-No PN/A <br /> number in Comments if available. <br /> 5.2 Vents-Secondary Components are moving freely and vent passageways are not <br /> obstructed for: r Yes r No r N/A <br /> • Emergency vent covers:Maka:,Model:,Diameter: r-Yes r-No rN/A <br /> • Secondary Vent:Maka:,Modal:,Diameter: r-Yes r-No 11 N/A <br /> • Other moving vent components(enter manufacturer and model <br /> number in Comments if available. <br /> Comments: <br /> No vents <br /> 5.3 Valves All valves are free of leaks, corrosion and damage. W Yes r No <br /> 5.3.1 Anti-siphon, check Cycle the valve open and closed and confirmed proper operation. r-Yes r-No rN/A <br /> and gate valves enter manufacturer and model number in Comments if available <br /> 5.3.2 Pressure regulator Confirmed proper operation. (Note that there may be small, 1/4 inch rYes rNo rN/A <br /> valve drain plugs in the bottom of the valve that are not visible by looking <br /> from above only)(enter manufacturer and model number in <br /> Comments if available <br /> 5.3.3 Expansion relief valve Confirmed that the valve is in the proper orientation. (Note that fuel r-Yes r No r N/A <br /> must be discharged back to the tank via a separate pipe or tubing.) <br /> (enter manufacturer and model number in Comments if available) <br /> \AO 6703819 SEFrEMBER 2016 <br />