Laserfiche WebLink
10/15/01 14:02 FAX 209 942 0914 Siegfried Eng U002 <br /> '-UST SYSTEM DRAWING INFORMATION Yi ' <br /> 1, 5(_ Three complete sets of plans (include manufacturer's specification sheets for proposed equipment to be installed). <br /> 2. Plans drawn to scale in non-erasable print. <br /> 3. Plot plan to show location of tanks and all associated piping. <br /> 4. Striker plates or drop tube-mounted bottom protectors illustrated below all accessible openings. <br /> 5. Tank cross-sectional diagram. <br /> 6. Detail of tank, associated piping, excavation and cover. <br /> 7, x Tank(s) and piping approved by a nationally recognized independent testing organization. [Title 23, Chapter 16, <br /> Article 3, Section 2631 (b) & 2635) <br /> g, Verification of product compatibility with the tank(s), piping, monitoring <br /> device(s), epoxy or silicone glues, etc. <br /> 9. Manufacturer's written installation instructions for tank(s), piping, monitoring devices, etc. <br /> 10. At the instaLlation site, prior to installation, a tightness test shall be performed on both primary (1°) and <br /> secondary (2') containment systems before covering. [Section 2635 (a) (3) & (4)] <br /> 11. 4 Tank integrity test required upon completion of installation with tank in operating condition. Test results to be <br /> submitted directly to PHS-END from the testing company or owner of facility. [Health & Safety Code, Division 20, <br /> Chapter 6.7, Section 25291 (h)] <br /> 12. TANK COMPOSITION <br /> TANK # # # # # # <br /> CAPACITY <br /> MANUFACTURER Nloc " n <br /> COMPOSITION �5 Fir <br /> MODEL <br /> PRODUCT `_O <br /> CORROSION PROTECTION l rl 16C <br /> U.L. LISTED S <br /> COMPATIBILITY WITH 100%. <br /> METHANOL 5 <br /> _ L <br /> 13. TANK(&) TO BE INSTALLED <br /> A. Steet-clad with fiberglass reinforced plastic coatings, composites, or equivalent non-metallic exterior <br /> coatings or coverings. <br /> �( (1) Tested at the installation site using an electric resistance holiday detector. <br /> (2) Vacuum applied to interstitial space. <br /> B. Fiberglass <br /> (1) Installation instructions require an air test and soap bubble test prior to installation. <br /> (2) Vacuum applied to interstitial space. <br /> (3) Hydrostatic annular (primary tank pressure test). <br /> C. Non-clad steel tank [section 2635 (a) (2) (A)] <br /> _ (1) Cathodic proter.tinn provided for entire tank, piping and components (nuts, bolts, washers, <br /> etc.). <br /> _ (2) Field installed cathodic protection systems designed and certified as adequate by a <br /> corrosion specialist. <br /> (3) Impressed current systems to be inspected no Less than every 60 days. <br /> 5 <br />