INSTALL 2002 - Laserfiche WebLink

Home Browse Search

OPW 10 SERIES EMERGENCY SHUT-OFF VALVES OPW 10 Series Emergency Shut-off Valves are installed on fuel supply lines beneath dispensers at rade level to minimize hazards associated with Patented Thermal P 9 Low Profile Relief Valve collision or fire at the dispenser. If the dispenser is pulled over or dislodged by collision, the top of the valve breaks off at the integral shear groove, Air Test Main activating poppets and shutting off the flow of fuel. Single-poppet models Poppet Seat Port shut off supply flow,while double-poppet models shut off supply as well as Secondary prevent release of fuel from the dispenser's internal piping. The base of the Poppet Emergency Valve is securely anchored to the concrete dispenser island through a stabilizer bar system within the dispenser sump or pan to ensure Fusible Urik" proper shearing action. The valve base is secured to the stabilizer bar using Nickel-Ptated, a three-point boss mount system or with a U-Bolt Kit.Valve inlet(bottom) Teflon-Coated . connections are female pipe threads and outlet(top)connections are Combination Main Stem available with female threads,male threads,or a union fitting. Other options Body include suction system models with a normally closed secondary poppet Main which maintains prime, and models with external threads on the inlet body Poppet which connect to secondary containment systems. _ Features ♦High Flow Capacity—The primary Reliable Shut-off—A Stainless ♦Multiple Mounting Options— poppet is held out of the flow stream Steel Main Spring,a Teflon-Coated Valves are boss mounted to stabilizer while the secondary poppet is held Brass Packing Nut, and a Copper- bars in sumps and pans or mounted to normally open to minimize head loss Nickel-Chrome Plated Brass Stem bars embedded in the island with across the valve and to protect the are designed to prevent tar build-up U-Bolt kits. Versatile Combination Body Z poppet seals from damage and erosion. and corrosion from interfering with (boss mounUU-Bolt mount)models are True 1S"and 2" body sizes ensure poppet operation after long periods of available to accommodate most maximum flow. normal service without activation. mounting applications with one valve style. ♦Fire Protection—A fusible link trips the Integral Test Port—A X"Test Port ♦Underwriters Laboratories— valve closed at 165°F to shut off fuel allows the piping system to be air tested Listed for use with gasoline and 85% supply to the dispenser. without breaking any piping connections. and 100%methanol.All OPW 10 *Main Poppet Seat Integral to the Top *Patented Thermal Relief Valve— Emergency Shut-Off Valves meet V� Assembly—Having the main poppetRelieves excessive pressure build-up requirements of UL STANDARD 842. seat as an integral part of the valve top caused by thermal expansion of fuel ♦Duragard°-Coat Finish—Provides assures a new, clean seating surface is in the dispenser piping system in superior corrosion resistance. installed each time the top is replaced. the event of fire(double-poppet This design also ensures that the models only). integrity of the seal between the valve top and bottom is verified during line *Low-Profile Tops—Female and NOTICE: CD testing and allows full inspection of the Union top double poppet valves have a As per NFPA 30A,electrical supply to the low-profile top to allow upgrading from submersible um must main poppet when the top is removed. OPW single-poppet valves disconnected before servicing meters, without changing existing piping. dispensers or emergency shut-off valves. rM Materials Top: cast iron' IMPORTANT NOTICE: cn Body: cast iron' When mounting the OPW 10 Series Emergency Shut-off Valves,the anchoring system employed Disc: M-19 must withstand a force greater than 650 ft. pounds per valve. Carrier:zinc plated steel NFPA Code 30A,Automotive and Marine Service Station Code,requires that the automatic closing feature of emergency shut-off valves be checked at least once per year by manually tripping the Stem: copper-nickel-chrome plated hold-open linkage. brass OPW recommends the use of PISCES'"' Stabilizer Bar Support System for proper mounting of 10 Poppet spring: stainless steel Series Valves. Seal: M-19 0-ring Packing nut: brass, Teflon" coated OPW 10S Stabilizer Inlet and outlet thread: 1Y2" NPT Bar Assembly OPW 1011W Wrench (British threadsavailable) (With black aga la coating The OPW 10S Stabilizer Bar Assembly is used The OPW 10RW Wrench is used to install n installations where no valve mounting system and remove 1X' OPW 10 Series Emergency exists.When properly imbedded into the island Shut-off Valves and is designed to prevent concrete, 10S holds the OPW 10 Series valves stress to the shear section of the valve dur- rigidly in place to assure proper shearing action. ing installation. The 10S assembly includes all necessary This wrench is made of ductile iron and has installation hardware a 1/"diameter boss for use with a pipe 84 wrench. and a hole for a Z'diameter rod.