Laserfiche WebLink
k <br /> Pl asteel El utron Storage Tanks and Systems <br /> SPECIFICATION <br /> PLASTEELR ELUTRONR DOUBLE-WALL <br /> FLAMMABLE LIQUIDS UNDERGROUND STORAGE TANK <br /> TANK SHALL BE UNDERWRITERS LABORATORIES, INC. LISTED AND BEAR THE LISTING MARK <br /> FOR JACKETED UNDERGROUND TANK FOR FLAMMABLE LIQUIDS. LABEL SHALL STATE "THIS TANK <br /> PROVIDES TYPE II (360 DEGREES) SECONDARY CONTAINMENT AND CORROSION PROTECTION. " <br /> THE PRIMARY STEEL TANK SHALL BE OF MILD STEEL PLATE, ALL WELDED CONSTRUCTION, <br /> COMPLYING WITH U.L. STANDARDS 58 AND 1746. THE LISTING SHALL INCLUDE THE U.L. <br /> EXTERNAL PRESSURE TEST IN UL STANDARD 58, PARAGRAPH 18 . <br /> THE U.L. LISTING SHALL COVER THE ENTIRE TANK ASSEMBLY AND SHALL SPECIFICALLY <br /> INCLUDE THE PATENTED ALUMINUM, INTERSTITIAL STAND-OFF, MATERIAL. THE ENTIRE U.L. <br /> LISTED ASSEMBLY SHALL COMPLY WITH U.L. STANDARD 1746, PART III, EXTERNAL <br /> CORROSION PROTECTION SYSTEMS FOR STEEL UNDERGROUND TANKS. <br /> INTERSTITIAL MONITORING SHALL BE: BY A LIQUID SENSOR, BY VISUAL DETERMINATION OR <br /> BY MANUAL DETERMINATION IN ACCORDANCE WITH THE AUTHORITY HAVING JURISDICTION. <br /> THE INTERSTICE IS U.L. LISTED TO BE SEALED (NON-VENTED) AND IS RECOMMENDED TO BE <br /> SEALED. <br /> THE EXTERIOR SEAMLESS FRP SECONDARY CONTAINMENT STRUCTURE SHALL SHOW NO HOLIDAYS <br /> (PINHOLES) WHEN USING A TINKER & RASOR MODEL AP-W HOLIDAY DETECTOR SET AT 35, 000 <br /> VOLTS OR TESTED WITH A VACUUM OF 10" HG ON THE INTERSTICE FOR ONE HOUR. <br /> THE TANK MANUFACTURER SHALL PROVIDE A TANK INSTALLATION TIGHTNESS TEST METHOD <br /> USING AN INTERSTITIAL VACUUM. THIS METHOD MUST BE THIRD PARTY EVALUATED PER THE <br /> E.P.A. ALTERNATE TANK TIGHTNESS TEST METHOD AND COMPLY WITH 40 CFR, PART 280, <br /> PARA.280. 43 (C) . <br /> THE TANK SHALL BE LISTED FOR ALL MOTOR FUELS INCLUDING, BUT NOT LIMITED TO, <br /> UNLEADED GASOLINE, LEADED GASOLINE, GASOHOL IN ANY ALCOHOL BLEND PERCENTAGE, 100% <br /> METHANOL, 100% ETHANOL, JET FUEL AND DIESEL FUEL. <br /> TANK MANUFACTURER SHALL SUPPLY INSTALLATION INSTRUCTIONS AND A KIT OF MATERIALS <br /> AND RESIN FOR SEALING ALL EXPOSED METAL DURING TANK INSTALLATION. THE TANK IS TO <br /> BE INSTALLED PER NFPA-30, MANUFACTURER'S INSTRUCTIONS AND PER THE AUTHORITY <br /> HAVING JURISDICTION. <br /> PRODUCT TRADE NAME: PLASTEELR ELUTRONR DOUBLE-WALL TANK <br /> U.S.R. PATENT NUMBER: 5, 167, 352 <br /> MANUFACTURER: K&T Steel Corporation <br /> Twin Falls, Idaho 83303 <br /> 208-733-2554 Fax: 208-733-7239 <br /> California Office: 707-785-3547 <br /> 1660897 <br /> RFax: 707-785-2637 <br />