COMPLIANCE INFO 2006 - 2011 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page 5 of 7. UNDER-DISPENSER CONTAINMENT(UDQ TESTING Test Method Developed By: ❑UDC Manufacturer ❑Industry Standard X Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic ❑Other(Spec) Test Equipment Used: Caldwell Level Change Indicator Equipment Resolution: .002 UDC#1&6 UDC#2&5 UDC#3&4 UDC#7&12 UDC Manufacturer: Western Fiberglass Western Fiberglass Western Fiberglass Western Fiberglass UDC Material: Fiber lass Fiberglass Fiberglass Fiberglass UDC Depth: 29" 29''/z" 30" 311/4" Height from UDC Bottom to Top 12" 12" 13" 13" of Highest Piping Penetration: Height from UDC Bottom to 8" 8" 8" 8" Lowest Electrical Penetration: Condition of UDC prior to Dry Dry Dry Dry testing: Portion of UDC Tested Water Level 14" Water Level 14 '/Z" Water Level 15 ''/s" Water Level 16''/s" Does turbine shut down when UDC sensor detects liquid(both X Yes No ❑NA X Yes No ❑NA X Yes No ❑NA X Yes No ❑NA product and water)?* Turbine shutdown response time Not Alarmed Not Alarmed Not Alarmed Not Alarmed Is system programmed for fail- X Yes ❑No ❑NA X Yes ❑No ❑NA X Yes ❑No ❑NA X Yes ❑No ❑NA safe shutdown?* Was fail-safe verified to be Yes X No ❑NA Yes X No ❑NA Yes X No ❑NA Yes X No ❑NA op erational?* Wait time between applying 5 Minutes 5 Minutes 5 Minutes 5 Minutes water and starting test Test Start Time: 12:55 12:45 12:30 11:45 Initial Reading(RD: .001 .001 .001 .001 Test End Time: 1:25 1:15 1:00 12:15 Final Reading(RF): .001 .001 .001 .001 Test Duration: 30 Minutes 30 Minutes 30 Minutes 30 Minutes Change in Reading(RrR,): 0 0 0 0 Pass/Fail Threshold or Criteria: .005/30 Minutes .005/30 Minutes .005/30Minutes .005/30 Minutes Test Result: X Pass ❑Fail X Pass 0 Fail X Pass 0 Fail X Pass ❑Fail Was sensor removed for testing? X Yes ❑No ❑NA X Yes ❑No ❑NA X Yes ❑No ❑NA X Yes ❑No ❑NA Was sensor properly replaced and X Yes ❑No ❑NA X Yes ❑No ❑NA X Yes ❑No ❑NA X Yes ❑No ❑NA verified functional after testing? Comments—(include information on repairs made prior to testing and recommended follow-up for failed tests) ' If the entire depth of the UDC is not tested,specify how much was tested. If the answer to M of the questions indicated with an asterisk(*)is"NO"or"NA",the entire UDC must be tested. (See SWRCB LG-160)