Laserfiche WebLink
MAY-07-2008 12:36 Service Station Systems 408 938 8888 P.05 <br /> Monitoring System Certification-i of 3 <br /> Site Address: 6425 N. Pacific Ave. @ Central Ct. Date of Testing/Scrvicing: 4/9/08 <br /> D. Results of Testing/Servicing <br /> Software Version Installed. 327.04 <br /> Com tete the foll ins checklist: <br /> 13 Yes 0 No* I Is the audible alarm operational'? <br /> Yes ❑ No* Is the visual alarm operational'? <br /> LK Yes 0 No* Were all sensors visually inspected,functionally tested,and confirmed operational? <br /> M Yes 0 No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will <br /> not interfere with their proper operation? <br /> 11 Yes 17 No* If alarms are relayed to a remote monitoring station, is all communications equipment(eg, modem) <br /> 0 NIA operational? <br /> 11 Yes 0 No* For pressurized piping systems,does the turbine automatically shut down if the piping secondary containment <br /> 0 N/A monitoring system detects a leak,fails to operate, or is electrically disconnected? if yes: which sensors initiate <br /> positive shut-down? (Check all that apply) 11 Sump/Trench Sensors; 11 Dispenser Containment Sensors, <br /> Did you confirm positive shut-down due to leaks and sensor failure/disconnection? 11 Yes 0 No <br /> M Yes 0 No* For tank systems that utilize the monitoring system as the primary tank overfill warning device(i.e.no <br /> 0 N/A mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank <br /> fill point(s)and operating properly? If so, at what pt'rcent of tank capacity does the alarm trigger? 89 % <br /> 0 Yes* R No Was any monitoring equipment replaced? If yes, id tc1 specific sensors, probes,or other equipment replaced <br /> and list the manufacturer name and model for all replacement parts in Section E,below. <br /> 0 Yes* M No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply) <br /> 0 Product;0 Water. If yes,describe causes in Section E,below. <br /> at Yes 13 No* 1 Was monitor!M system set-up reviewed to ensure proper settings? Attach set-upre orfs, i applicable) <br /> 0t Yes O Now Is all monitoring equipment operational per manufacturer's specifications? <br /> In Section E below,describe how and when these deficiencies were or will be corrected. <br /> E. Comments: <br />