Laserfiche WebLink
File MH29667 Page T1-2 of 2 Issued: 2005-09-08 <br />SIMULATED USE RESISTANCE TO FLUIDS TEST (FIBERGLASS REINFORCED PLASTIC SUMP <br />MATERIALS): <br />METHOD <br />One sample assembly as described in Item B was placed in a container <br />filled with each of the fluids Listed below such that the fittings inside the <br />container were completely covered with the fluids. The samples and fluids <br />were maintained at a temperature of 100°F throughout the exposure. Following <br />30 days in this condition, the containers were subjected to an internal <br />pressure of 4.5 psig (based on a maximum sump depth of 10.3 ft.) for a period <br />of at least 5 min. while the samples were examined for evidence of leakage. <br />loot Methanol <br />50t Methanol/50% ASTM Reference Fuel C <br />15% Ethanol/858 ASTM Reference Fuel C <br />lot Ethanol/901 ASTM Reference Fuel C <br />151 MTBE/85% ASTM Reference Fuel C <br />RESULTS <br />There was no evidence of leakage <br />SIMULATED USE RESISTANCE TO FLUIDS TEST (FIBERGLASS REINFORCED PLASTIC SUMP <br />MATERIALS): <br />METHOD <br />One sample assembly as described in Item C was placed in a container <br />filled with each of the fluids Listed below such that the fittings inside the <br />container were completely covered with the fluids. The samples and fluids <br />were maintained at a temperature of 100°F throughout the exposure. Following <br />30 days in this condition, the containers were subjected to an internal <br />pressure of 4.5 psig (based on a maximum sump depth of 10.3 ft.) for a period <br />of at least 5 min, while the samples were examined for evidence of leakage. <br />100% Methanol <br />50% Methanol/50% ASTM Reference Fuel C <br />loot Ethanol <br />50% Ethanol/50% ASTM Reference Fuel C <br />15t Ethanol/85t ASTM Reference Fuel C <br />lot Ethanol/90t ASTM Reference Fuel C <br />15% MTBE/85% ASTM Reference Fuel C <br />RESULTS <br />There was no evidence of leakage <br />