Laserfiche WebLink
A Coming Company <br /> • <br /> L Sample Description <br /> See the attached Sample Description Information. <br /> The samples were received under chain-of-custody. <br /> II Analysis Request <br /> The following analytical tests were requested. <br /> Lab ID Analysis Description <br /> 059165-1 thru 6 1,2-Dibromoethane (EDB) <br /> Total Petroleum Hydrocarbons <br /> Lead <br /> III Quality Control <br /> A. Pro ect Specific OC. No project specific QC (i .e. , spikes and/or <br /> duplicates) was requested. <br /> B. Method Blank Results. A method blank is a laboratory-generated <br /> sample which assesses the degree to which laboratory operations <br />• and procedures cause false-positive analytical results for your <br /> samples. <br /> No target parameters were detected in the method blanks associated <br /> with your samples at the reporting limit levels noted on the data <br /> sheets in the Method Blank Report. <br /> C. Laboratory Control Samples - The US Program <br /> Duplicate Control Samples . A DCS is a well-characterized matrix <br /> (blank water, sand or cel3te) which is spiked with certain target <br /> parameters and analyzed at approximately 10% of the sample load in <br /> order to establish method-specific control limits. The DGS <br /> results associated with your samples are on the attached Duplicate <br /> Control Sample Report. <br /> Single Control Samples. An SCS consists of a control matrix that <br /> is spiked with surrogate compounds appropriate to the method being <br /> - _used. In cases where no surrogate is available, (e.g. metals or - <br /> conventional analyses) a single control sample identical to the <br /> DCS serves as the control sample. An SCS is prepared for each <br /> sample lot Accuracy is calculated identically to the DCS. The <br /> SCS results associated with your samples are on the attached <br /> Single Control Sample Report. <br /> 4 <br />