Laserfiche WebLink
APPENDIX A <br /> SAMPLING AND ANALYSIS PROCEDURES <br /> The sampling and analysis procedures for water quality monitoring programs are <br /> contained in this appendix The procedures provided for consistent and reproducible <br /> sampling methods, proper application of analytical methods, and accurate and precise <br /> analytical results Finally, these procedures provided guidelines so that the overall <br /> objectives of the monitoring program were achieved <br /> The following documents have been used as guidelines for developing these procedures <br /> • Procedures Manual for Groundwater Monitoring at Solid Waste Disposal Facilities, <br /> Environmental Protection Agency (EPA)-530/SW-611, August 1977 <br /> • Resource Conservation and Recovery Act (RCRA) Groundwater Monitoring <br /> Technical Enforcement Guidance Document, Office of Solid Waste and Emergency <br /> Response (OSWER) 9950 1, September 1986 <br /> o Test Methods for Evaluating Solid Waste Physical/Chemical Methods, EPA SW-846, <br /> 3rd edition, November 1986 <br /> © Methods for Organic Chemical Analysis of Municipal and Industrial Waste Water, <br /> EPA-600/4-82-057, July 1982 <br /> Methods for Organic Chemical Analysis of Water and Wastes, EPA-600/4-79-020, <br /> revised March 1983 <br /> • Leaking Underground Fuel Tank (LUFT) Field Manual, California State Water <br /> Resources Control Board, revised October 1989 <br /> Sample Collection <br /> Sample collection procedures include equipment cleaning, water level and total well depth <br /> measurements, and well purging and sampling <br /> SACV 1ARCO\07601QTRLY1760 QM2-95kdms 1 A-1 Rev 0 8/5/46 <br />