SR0079734 - Laserfiche WebLink

Home Browse Search

2 se Flygt MF3068.175 Grinder pumps with 30' of supply cab ti siphon/check va Flexible discharge hoses. A 3 adde e end of the part# designates 3 phase pump(s . Custom dimensions of fib asins are available. factory for available diameters and as required. HDPE Tank for simplex station; Flygt Compit: The station shall be made from iJV stabilized high density polyethylene that has high environmental stress crack res' Lance d low temperature impact resistance. The station shall be furnished complet with charge hose, fittings, check/anti-siphon valve and shut-off valve. The com ete sta ' n shall be capable of withstanding the full hydrostatic pressure exerte y fully satur ed soil at the maximum burial depth from the exterior of the statio while the station ' completely empty. A safety factor of two (2) on the minimum timate tensile strength the station taking into account all normally imposed loads sing from floatation, it pressures, normal backfill, handling loads, operating 1 ds and static loads impos by equipment used in hoisting the pumps in and out f the station. All inside surfac shall be smooth and bright white finish. The ation shall be provided with an ti-flotation flange located on the bottom of a station. This anti- flotation flange is a ' tegral part of the station and is suffid nt in design to withstand the forces acting upon he station due to the subsoil water essure. Once the station is inserted into the hole, n concrete ballast shall be require . The combination of the flange and the loading of ckfill material over the anti- oatation flange shall provide adequate ballast against bu ancy under full hydrosta c head conditions. The pump station shall have a wl-shaped botto which is self-cleaning by virtue of its design. The flat surface area s be minimiz to an area that is directly influenced by the pump suction and shall be f e of obstac s. The round sloping walls of the pump station bottom shall furthero imize self-cleaning features of this station by directing all solids, trash and sludge, n ma found in sewage and wastewater, to the suction of the submersible pump to fac' e removal and effectively clean the bottom. The tank shall include a lockable cover a bly providing low profile mounting and watertight capability. The cover shall b gh ensity polyethylene, with a load rating of 150 lbs. per square foot. The overall pacity the tank shall be 238 gallons. The Compit package includes basin com ete and pl bed, control panel with MultiTrode 3 point probe for level control, (1) 2 v, 1 phase Fly MF3068.175 Grinder pump with 30' of supply cable, Anti siphon/che valve, Flexible di harge hose and knife valve, factory installed 1 1/" FIPT SS scharge Bulkhead. T ee phase pump is available with the Compit package. HDPE Tank for duplex ation; Flygt Micro 10: The tank sha be made of rotational molded polyethylene th high Strength and even wall thicknes . The complete station shall be capable of ' standing the full hydrostatic pressure exe ted by fully saturated soil at the maxim burial depth from the exterior of the station e the station is completely empt A safety factor of two (2) on the minimum ultima tensile strength of the station t g into account all normally imposed loads arising f m floatation, soil pressures ormal backfill, handling loads, operating loads and stati loads imposed by equipme used in hoisting the pumps in and out of the station The to lid shall be an easy to ose, water tight, odor free threaded polyethylene cover. The slo ing walls of the pump station bottom shall further optimize the self-cle ' g fea s of this station by directing all solids, trash and sludge, normally found in 7