Laserfiche WebLink
Appendix C: Standard Operating Guideline Typical Hydraulic <br /> ' Push/Drive Sampling Procedures <br /> CA Introduction <br /> This guideline describes the equipment and procedures typically used by Kennedy/Jenks <br /> Consultants personnel for collecting soil and reconnaissance groundwater samples with a hydraulic <br /> ' push/drive system. <br /> C.2 Equipment <br /> • Portable, hydraulic push/drive sampling system <br /> • Laboratory-supplied sample jars <br /> • Type II Portland cement <br /> • FID or PID organic vapor analyzer <br /> • Water level indicator <br /> ' Temperature, specific conductivity and pH meters <br /> • Equipment cleaning materials <br /> ' Steam cleaner <br /> Generator <br /> Stiff-bristle brushes <br /> Buckets <br /> High-purity phosphate-free liquid soap <br /> ' Deionized water <br /> Rinsate collection system <br /> • Personal protective equipment <br /> ' Appropriate groundwater sample containers <br /> • Chain-of-custody forms <br /> ' • Insulated sample storage container and ice <br /> C.3 Typical Procedures <br /> ' 1. Applicable drilling permits will be obtained prior to mobilization. <br /> ' 2. Sample locations will be cleared for underground utilities. <br /> 3. All downhole equipment will be steam cleaned prior to use at each location. <br /> ' 4. Soil borings will be advanced using a portable, hydraulic push/drive sampling system that <br /> simultaneously drives two nested, steel sampling rods into the ground to collect continuous soil <br /> cores. <br /> ' Soil Investigation Work Plan, Stockton Railyard 1 <br /> 9.tadminasstG'obs120031032777.16_union pacific-stockton yaro109-repodsl9.09 reportslwork plan_soilbonn0appendiceslapp_c_pushdnvesam.doc <br />