WORK PLANS - Laserfiche WebLink

Home Browse Search

Project personnel shall bring to the attention of the designated FSS any unsafe condition or practice associated with on-site project-related activities. All boring, excavation, heavy equipment operation and general construction activities shall be performed in compliance with 29 CFR 1926. All project personnel who are required to wear purifying or air supplied respirators must first meet the training and medical requirements of 29 CFR 1910.120 and 20 CFR 1910.134. No contact lenses may be worn within 20 feet of drilling activity ("hot zone"). 7.1 Control of Work Area Prior to the start of work the work area shall be controlled to reduce the possibility of injury to workers or pedestrians. Control of the area will be accomplished by, but not limited to, the following: Setting up physical barriers to exclude unnecessary personnel from the area and posting appropriate signage. Establish the working zones (Exclusion Zone, Support Zone and Clean Zone) within the work site. Minimize the number of personnel and equipment in the work area consistent with effective operations. Establish control points to regulate access to work zones. Prior to the start of work each shift, the FSS shall conduct an inspection of the devices used to control the work area. (See Appendix F, Site monitoring Log.) 7.2 Drill Rig Safety Guidelines Drill rig maintenance and safety is the responsibility of the drilling operator. The following information is provided as general guidelines for safe practices on the site: • No food or beverage will be consumed or stored in the operational area. • The route of travel before moving the drill rig off-road should be inspected. Rocks, trees, erosion, power lines and uneven surfaces should be noted. • No passengers shall be permitted in the cab while moving the drill rig into Santochi&Bravante LLC American Savings Bank 20 Corporate Plaza 9620-041-1 Newport Beach,California 8 222 El Dorado