Laserfiche WebLink
QST EWM0 M W'kL <br /> HAZARD MITIGATION & CONTROL {Cont'd) <br />' • All personnel shall be informed by the appropriate equipment operator of the location of the "kill switch" <br /> for each piece of equipment on site <br />' • Loose fitting clothing and long hair that is not adequately tied up are not allowed when working in the <br /> vicinity of the drilling/boring equipment <br />' • QST personnel should not attempt to obtain samples from operating drilling equipment. <br />' Heavy Equipment Hazards: <br /> • A warning device or signal person shall be provided to protect employees from moving drilling/boning <br /> tequipment. For signal person Where hand signals are used, only one person shall be the designated signal <br /> person, and shall be located to see the load and be clearly visible to the operator <br /> • Employees are not permitted underneath loads handled by lifting or digging equipment Employees shall also <br /> stay clear of any vehicle being loaded or unloaded. <br /> 1 • Seatbelts shall be worn if available, except for equipment designed for stand-up operation <br /> • Equipment shall be shut down during refueling <br /> o Loose fitting clothing and long hair that is not adequately tied up are not allowed when working in the <br /> vicinity of heavy equipment <br /> LEVEL C: <br /> • Full-face air purifying respirator <br /> • Chemical resistant clothing <br />' • Outer chemical resistant gloves <br /> • Inner chemical resistant gloves <br /> • Chemical resistant outer boots and steel toe inner boots, or <br /> 1 Chemical resistant, steel toe boots <br /> • Optional items- hard hat, disposable boot covers, and disposable coveralls for over chemical resistant <br />' clothing, hearing protection <br /> LEVEL D: <br /> • Coveralls or appropriate work clothing <br />' e Gloves <br />' SFS Property No 127434-SW ciman-6498090-September 23 1998 <br />