ARCHIVED REPORTS XR0008122 - Laserfiche WebLink

Home Browse Search

WORK ZONES AND SECURITY MEASURES THE WORK AREA WILL BE RESTRICTED TO THE FENCED REMEDIATION SITE OR BARRICADED OFF FROM PASSERBY WHEN DRILLING MW7 . ALSO THE TREATMENT COMPOUND IS CONTAINED WITHIN A SECURITY FENCE. SITE ACCESS IS RESTRICTED BY PERMANENT SECURITY FENCE WHICH IS KEPT LOCKED AND THE WELLS HAVE LOCKING SECURITY INSIDE THE TRAFFIC BOX LID, WHICH IS SECURED BY BOLTS . DECONTAMINATION MEASURES AT THE END OF EACH WORK DAY ALL WEGE PERSONNEL (AND SUBCONTRACTORS ) WILL THOROUGHLY WASH THEIR HANDS , FACE AND FOOTWEAR BEFORE LEAVING THE SITE. IN THE EVENT THAT PERSONNEL PROTECTIVE EQUIPMENT IS NECESSARY, ALL DISPOSABLE ITEMS WILL BE DEPOSITED INTO A STEEL DRUM CONTAINER ON SITE AND ALL REUSABLE ITEMS WILL BE WASHED WITH TSP DETERGENT AND RINSED WITH CLEAN WATER. RESIDUAL LIQUID WILL BE PLACED IN A STEEL DRUM CONTAINER ON SITE. PERSONNEL WILL NOT BE ALLOWED TO LEAVE THE CONTAMINATED AREA WITHOUT COMPLETING THE DECONTAMINATION PROCESS . GENERAL SAFETY WORK PRACTICES IT IS IMPERATIVE THAT ALL PERSONNEL BE AWARE OF ANY MACHINERY IN MOTION AT THE SITE ALONG WITH ANY GENERAL TRAFFIC ASSOCIATED WITH THE SITE AND THE ADJACENT PARKING LOT. THE DESTRUCTION EQUIPMENT ARE 85 AND/OR 110 GALLON VAPOR CARBON SCRUBS , SUPPLIED BY CAMERON-YAKIMA, OF YAKIMA, WASHINGTON. WHEN MONITORING THE VAPOR STREAMS , A 1500 PSI CYLINDER OF 0-0 AIR IS USED AS CARRIER AIR FOR THE PID CHROMATOGRAPH, THE CYLINDER SHOULD BE HANDLED WITH CARE WHEN HOOKING UP THE REGULATOR TO THE CYLINDER AND PTD-GC. THE CYLINDER SHOULD BE LAID DOWN AND SECURED FORM MOVEMENT IN SUCH A FASHION AS TO PROTECT THE VALVE FROM INJURY AND AWAY FROM ANY HEAT OR SPARK SOURCES . Common sense in regurds to the drilling rig and equipment is a must . Heat exposure Physical Hazards Noise No Traffic No Underground Hazards No E Overhead Hazards No Excavations/Trenches No Mechanical Equipment Yes Level of Protective Equipment