Laserfiche WebLink
1. INTRODUCTION <br /> ' On behalf of Exxon Company, U.S.A. (Exxon), EA Engineering, Science, and Technology (EA) <br /> �• has prepared this work plan for confirmation soil borings at Exxon Retail Site (RS) 7-0137, <br /> located at 1605 South El Dorado Street, Stockton, California(Figure 1). This work plan <br /> provides a site description, a summary of previous site investigations, a summary of the <br /> distribution of petroleum hydrocarbons in soil and groundwater, a summary of the remediation <br /> progress at the site, a proposed scope of work, and a tentative schedule to perform the work. <br /> `r The objective of the current investigation is to confirm that hydrocarbon-impacted soil at the site <br /> has been remediated by soil vapor extraction. This will be determined by collecting soil samples <br /> at locations and depths where elevated petroleum hydrocarbon concentrations were detected <br /> �. during previous investigations. The findings of the proposed investigation will be used to <br /> support a request for closure at the site. <br /> Lo <br /> The work plan proposes the following scope of activities: <br /> ,.. 0 Obtain soil boring permits from the San Joaquin County Public Health Services, <br /> Environmental Health Division(SJCEHD). <br /> �-• 0 Prepare a Site Health and Safety Plan. <br /> • Locate proposed sampling locations, notify Underground Service Alert, and clear locations <br /> with an underground utility locating contractor. <br /> • Collect soil samples at four locations at discrete depths of approximately 16, 25, 35, and <br /> WZ 45 feet below ground surface (bgs). Soil samples will be screened in the field and <br /> submitted for laboratory analyses. ;t <br /> _! 0,1 <br /> • Collect grab groundwater samples at approximately 46 feet bgs(first encountered water) <br /> by lowering a bailer into the temporarily cased hole at this depth. <br /> V <br /> • Remove the casing and backfill the borehole to grade after all samples are collected in <br /> accordance with local regulatory requirements. <br /> • Submit groundwater samples and selected soil samples to a state-certified laboratory and <br /> analyze the samples for Total Petroleum Hydrocarbons as gasoline (TPH-g),benzene, <br /> �. toluene, ethylbenzene, and total xylenes (BTEX), and methyl tert-butyl ether(MTBE)by <br /> EPA Method 8015 mod/8020; and for MTBE, tert-amyl methyl ether(TAME), ethyl tert- <br /> butyl ether(ETBE), di-isopropyl ether(DIPE), and tert-butyl alcohol (TBA)by EPA <br /> Method 8260. <br /> • Prepare a report summarizing field activities,analytical data, and proposed well locations <br /> if warranted. <br /> . 76137.WP9vB.C[AS.WP,wPri 1 <br /> i.r <br />